Tripp Lite B097016INT Owners Manual for B093- B097- and B098-Series Console Se - Page 227

14. Configuration from the Command Line 14.1.12 Port Log To configure serial/network port logging: # config -s config.eventlog.server.address='remote server ip address' # config -s config.eventlog.server.logfacility='facility' 'facility' can be: Daemon Local 0-7 Authentication Kernel User Syslog Mail News UUCP # config -s config.eventlog.server.logpriority='priority' 'priority' can be: Info Alert Critical Debug Emergency Error Notice Warning Assume the remote log server needs a username 'name1' and password 'secret': # config -s config.eventlog.server.username=name1 # config -s config.eventlog.server.password=secret To set the remote path as '/tripp-lite/logs' to save logged data: # config -s config.eventlog.server.path=/ tripp-lite/logs # config -s config.eventlog.server.type=[none | syslog | nfs | cifs | usb] If the server type is set to usb, none of the other values need to be set. The mount point for storing on a remote USB device is /var/run/portmanager/logdir The following command will synchronize the live system with the new configuration: # config -a 14.1.13 Alerts You can add an email, SNMP or NAGIOS alert by following the steps below. General Settings for All Alerts Assume this is our second alert, and we want to send alert emails to [email protected] and SMS text messages to peter@ tripplite.com: # config -s config.alerts.alert2.description=MySecondAlert # config -s config.alerts.alert2.email=john@ tripplite.com # config -s config.alerts.alert2.email2=peter@ tripplite.com To use NAGIOS to notify of this alert: # config -s config.alerts.alert2.nsca.enabled=on To use SNMP to notify of this alert: # config -s config.alerts.alert2.snmp.enabled=on Increment the total alerts: # config -s config.alerts.total=2 227