Tripp Lite BP240V10RT3U Installation Instructions for Select Rackmount UPS 933 - Page 2

Installation (continued) 4  With the aid of an assistant (if necessary), lift your equipment and slide it into the shelves. Attach the equipment mounting brackets to the forward mounting rails with user-supplied screws and washers D . Tighten all screws securely. D 4 2U D 4 3U Threaded-Hole Rack Installation B 1  Align the mounting rail A along the inside surface of the rack posts B so that the flanges on the ends of the rail wrap around to the front and rear surfaces of the posts and the rail holes meet the threaded holes on the rack post. A 2  Secure the shelves A to the mounting rails permanently using user- 1 supplied screws and washers C for your rack as shown. • For 2U equipment mounting, place 4 screws total at the front and 4 A screws total at the back. • For 3U equipment mounting, place 6 screws total at the front and 4 screws total at the back. Tighten all screws before proceeding. Warning: Do not attempt to install your equipment until you have inserted and tightened the required screws. C 3  Follow steps 3 and 4 of the Square-Hole Rack Installation instructions (above) to securely mount your 3U equipment. 2 2U A D D A B C C C 2 3U Warranty Registration Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You'll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product! No purchase necessary. Void where prohibited. Some restrictions apply. See website for details. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. 1111 W. 35th St., Chicago, IL 60609 USA www.tripplite.com/support 2 201107071 93-3000-EN