Tripp Lite CS16USB Owner's Manual for Tablet Charging Stations 933375 (Multi-l - Page 8

8. Adjusting Storage Shelf Dividers Your tablet charging station comes with one (CS16USB), two (CS32USB) or three (CS48USB) storage shelves with adjustable dividers that each can accommodate up to 16 personal electronic devices per shelf. 8.1 Adjusting the CS16USB Shelf Dividers Remove any personal electronic devices stored on the shelf tray. Then remove the shelf tray from the cabinet by unscrewing the four fasteners attached to the two front rack rails. Once the shelf is removed, rearrange the dividers by pulling them out or snapping them into the shelf tray. 8.2 Adjusting the CS32USB and CS48USB Shelf Dividers Remove any personal electronic devices stored on the shelf tray. Then unlock and open the rear door to the cabinet. From the front or rear of the cabinet, rearrange the dividers by pulling them out or snapping them into the shelf tray. Repeat as necessary for additional shelf trays. 9. Specifications Model CS16USB CS32USB CS48USB Dimensions (H x W x D) 14.5 x 23.63 x 17.5" (368 x 600 x 445 mm) 21.6 x 23.63 x 21.6" (549 x 600 x 549 mm) 35.6 x 23.6 x 21.6" (905 x 600 x 549 mm) Unit Weight 29 lb (13 kg) 55 lb (25 kg) 96 lb (43.5 kg) Load Capacity* 200 lb (90 kg) Stationary or Rolling 200 lb (90 kg) Stationary or Rolling 250 lb (113 kg) Stationary or Rolling Cabinet Mounting Depth (Adjustable) 3" to 16.5" (76 to 419 mm) 3" to 20.5" (76 to 521 mm) 3" to 20.5" (76 to 521 mm) Charger/Hub Ports 16 x USB 2.0 A (Female) 1 x USB 2.0 B (Female) 1 x USB 2.0 mini (Female) 32 x USB 2.0 A (Female) 2 x USB 2.0 B (Female) 2 x USB 2.0 mini (Female) 48 x USB 2.0 A (Female) 3 x USB 2.0 B (Female) 3 x USB 2.0 mini (Female) Transmission Speed Up to 480 Mbps Up to 480 Mbps Up to 480 Mbps Power Requirement Input: 100-240V, 2.5A, 50/60 Hz Output: 5.0V, 2.4A Max (per USB port) Input: 100-240V, 2.5A, 50/60 Hz Output: 5.0V, 2.4A Max (per USB port) Input: 100-240V, 2.5A, 50/60 Hz Output: 5.0V, 2.4A Max (per USB port) Operating Temperature 32° to 104° F 0° to 40° C 32° to 104° F 0° to 40° C 32° to 104° F 0° to 40° C Operating Humidity 5 to 95% RH, Non-Condensing 5 to 95% RH, Non-Condensing 5 to 95% RH, Non-Condensing Number of Charger/Hub Units 1 2 3 Charger/Hub Dimensions per Unit (H x W x D) 1.75 x 17.5 x 9.5" (45 x 445 x 240 mm) 1.75 x 17.5 x 9.5" (45 x 445 x 240 mm) 1.75 x 17.5 x 9.5" (45 x 445 x 240 mm) Enclosure Material Metal Metal Metal Regulatory Approvals UL 60950, TUV (US and Canada), UL 60950, TUV (US and Canada), UL 60950, TUV (US and Canada), NOM (Mexico) and RoHS NOM (Mexico) and RoHS NOM (Mexico) and RoHS *Full wall-mount load capacity requires a mounting surface capable of bearing the full load of the tablet charge and sync station and all connected components. Rolling applications require optional SRCASTER accessory kit. Specifications are subject to change without notice. 10. Optional Casters An optional caster accessory kit (Model: SRCASTER) is available for purchase through Tripp Lite (visit www.tripplite.com for details). The SRCASTER Kit's 4 casters and mounting hardware install to the pre-drilled holes located on the base of the enclosure. For further installation instructions, refer to the manual included with the SRCASTER Kit. 8