Tripp Lite NSU-G24C2P08 Owner's Manual for PDU Network Switch Combo 9333A3 (En - Page 4

Product Features

Get Tripp Lite NSU-G24C2P08 PDF manuals and user guides View all Tripp Lite NSU-G24C2P08 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

Product Features Front Panel: 4 5 1 3 2 6 Rear Panel: 7 8 9 1 Gigabit Ethernet Ports: These 24 twisted-pair RJ-45 ports support auto-negotiable 10/100/1000 Mbps and auto MDI/MDIX cross-over detection functions for true "plug and play" capability. There are two green LEDs per RJ-45 port. The left LED blinks when the port is active. The right LED is off at 10 Mbps and lights up at 100 Mbps and 1000 Mbps, remaining lit while at that speed. Note: Ports 9-24 are not compatible with PoE (Power Over Ethernet) applications. 2 Power ON/OFF LED: An LED illuminates to indicate that the switch is receiving power. 3 MiniGBIC: The MiniGBIC (gigabit interface converter) ports are connection points for MiniGBIC modules, so the unmanaged switch can uplink to other switches using optical fiber. The MiniGBIC interfaces are combination ports, each shared with one other RJ-45 port. When the MiniGBIC is active, the adjacent RJ-45 port will be disabled. The LEDs on the adjacent RJ-45 ports will react to the MiniGBIC interface traffic. 4 Circuit Breaker: If the current drawn by the equipment connected to the PDU exceeds the Maximum Load Rating, the 12A thermal circuit breaker will trip to prevent possible damage and its plunger will pop up. If this happens, disconnect excess equipment and allow the breaker to cool at least one minute before depressing the plunger to reset the unit. 5 PoE LEDs: The corresponding PoE LEDs will light up solid green when a power device is connected to ports 1 through 8. If the port loses power, the LED will turn off. If there is an overload or fault condition, the LED will flash green. 6 PoE Ports: These eight ports can provide up to 30 watts of power per port to attached devices like VoIP phones, wireless access points, surveillance cameras-all over existing network cables. Note: Cat6A cables such as Tripp Lite's N261-Series are recommended for optimal performance. 7 NEMA 5-15R Outlets: This switch includes 12 NEMA 5-15R receptacles. 8 Input: AC power input from a connected UPS system or alternate source. 9 Grounding Lug: Use this screw to connect your switch to ground. 4 15-04-352-9333A3.indd 4 4/30/2015 9:43:56 AM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
4
Front Panel:
Rear Panel:
Product Features
1
Gigabit Ethernet Ports:
These 24 twisted-pair RJ-45 ports support auto-negotiable
10/100/1000 Mbps and auto MDI/MDIX cross-over detection functions for true “plug and
play” capability. There are two green LEDs per RJ-45 port. The left LED blinks when the port is
active. The right LED is off at 10 Mbps and lights up at 100 Mbps and 1000 Mbps, remaining
lit while at that speed.
Note:
Ports 9-24 are not compatible with PoE (Power Over Ethernet) applications.
2
Power ON/OFF LED:
An LED illuminates to indicate that the switch is receiving power.
3
MiniGBIC:
The MiniGBIC (gigabit interface converter) ports are connection points for
MiniGBIC modules, so the unmanaged switch can uplink to other switches using optical fiber.
The MiniGBIC interfaces are combination ports, each shared with one other RJ-45 port. When
the MiniGBIC is active, the adjacent RJ-45 port will be disabled. The LEDs on the adjacent
RJ-45 ports will react to the MiniGBIC interface traffic.
4
Circuit Breaker:
If the current drawn by the equipment connected to the PDU exceeds the
Maximum Load Rating, the 12A thermal circuit breaker will trip to prevent possible damage
and its plunger will pop up. If this happens, disconnect excess equipment and allow the
breaker to cool at least one minute before depressing the plunger to reset the unit.
5
PoE LEDs:
The corresponding PoE LEDs will light up solid green when a power device is
connected to ports 1 through 8. If the port loses power, the LED will turn off. If there is an
overload or fault condition, the LED will flash green.
6
PoE Ports:
These eight ports can provide up to 30 watts of power per port to attached
devices like VoIP phones, wireless access points, surveillance cameras—all over existing
network cables.
Note:
Cat6A cables such as Tripp Lite’s N261-Series are recommended for optimal performance.
7
NEMA 5-15R Outlets:
This switch includes 12 NEMA 5-15R receptacles.
8
Input:
AC power input from a connected UPS system or alternate source.
9
Grounding Lug:
Use this screw to connect your switch to ground.
1
4
5
3
7
8
2
6
9
15-04-352-9333A3.indd
4
4/30/2015
9:43:56 AM