Tripp Lite OMNI1000ISO Owner's Manual for OMNISMART UPS 932490 - Page 4

200607050 93-2490 OmniSmart ISO Update.qxd 7/26/2006 11:39 AM Page 4 Quick Installation optional USB Communication Port This port can connect your UPS to any computer for automatic file saves and unattended shutdown in the event of a power failure. Use with Tripp Lite's PowerAlert Software and appropriate USB cable. A PowerAlert CD and USB cable may be included with your UPS; if so, insert the CD into the CD tray of your computer and follow the installation instructions. If PowerAlert Software and a USB cable did not come with your UPS, you can obtain the software FREE via the Web at www.tripplite.com. Any user-supplied USB cable may then be used to connect your UPS to your computer. NOTE: This connection is optional. The UPS will work properly without this connection. Model Shown: OMNI500ISO Basic Operation Buttons Use the ON/OFF button to do three things: Switch your UPS's Operating Mode: While your UPS is plugged into a live AC outlet, press the ON/OFF button and hold it until you hear a beep (about 2 seconds) to toggle between the following operating modes. Choose your UPS's operating mode based on the regional guidelines in Step 3 of the Quick Installation section. • UPS Mode: ENABLES battery backup. UPS Conditions: The UPS charges its battery and supplies power at its receptacles when it is receiving utility line power. If utility power fails, the UPS provides power from its batteries. The " " indicator light is lit. Setting Advantages: Provides battery backup during blackouts or brownouts. 4