Tripp Lite OMNIVSINT1000 Owner's Manual for OMNIVSINT800/OMNIVSINT1000/OMNIVSI - Page 3
Quick Installation - power supply
View all Tripp Lite OMNIVSINT1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Quick Installation 1 Unplug the computer's power cord from both AC outlet and the computer's AC input. 1 IEC320-C14 plug shown 2 Insert the female plug of the NORM DELAY computer's cord into the UPS's AC input. A Insert the male plug of the computer's A cord into AC outlet. NOTE! After you plug the UPS into a live AC outlet, the UPS will turn ON automatically. See "ON/OFF" Button description in the Basic Operation section if you want to place the UPS in any mode 2 other than ON. Shown: OMNIVSINT1000 3 Using one of the jumper cords supplied with the UPS, insert the cord's female plug into computer's AC input B . Insert the cord's male plug into any of UPS's female output receptacles. 3 4 Plug additional equipment into the UPS.* Use one of the additional jumper cords supplied with the UPS, or order additional jumper cords from Tripp Lite. Log on to www.tripplite.com/support; order part # P004-006. * Your UPS is designed to support only computer equipment. You will overload the UPS if the total VA ratings for all the equipment you 4 connect exceeds the UPS's output capacity (see Specifications). To find your equipment's VA ratings, look on their nameplates. If the equipment is listed in amps, multiply the number of amps by 230 to determine VA. (Example: 1 amp × 230 = 230 VA). If you are unsure if you have overloaded the UPS's outlets, see "OUTPUT LOAD LEVEL" LED description. NORM DELAY B Shown: OMNIVSINT1000 NORM DELAY Shown: OMNIVSINT1000 3 200908153 93-2205.indd 3 11/2/2009 1:17:16 PM