Tripp Lite SMART1050SLT Owner's Manual for SmartPro SLT UPS 932442 - Page 3
Quick Installation - power protection
View all Tripp Lite SMART1050SLT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Quick Installation 1 With the UPS disconnected from utility power, use a small tool to set the Voltage Dip Switch to match your input voltage. (All models are preset to the 120V setting.) 1 2 Plug the UPS into an outlet on a dedicated circuit. NOTE! after you plug the UPS into a live AC outlet, the UPS will automatically charge its batteries,* but will not supply power to its outlets until it is turned ON. 2 * The BATTERY CHARGE LED will be the only LED illuminated 3 Plug your equipment into the UPS. Models SMART1500SLT & SMART1050SLT: All outlets provide battery backup and surge protection for computers, monitors and other critical devices. Model SMART750SLT: Select outlets provide battery backup and surge protection for computers, monitors and other 3 critical devices; select outlets provide surge protection only for printers and other nonessential devices. Do not plug high-draw equipment such as laser printers into the battery backup/surge protection outlets. Note: Your UPS is designed to support electronic equipment only. You will overload the UPS if the total VA rating for all equipment connected through the battery backup/surge protection outlets exceeds the UPS's Output Capacity. To find your equipment's VA ratings, look on their nameplates. If the equipment is listed in amps, multiply the number of amps by 120 to determine VA. (Example: 1 amp × 120 = 120 VA). If you are unsure if you have overloaded the UPS's outlets, see "OUTPUT LOAD LEVEL" LED description. 4 Turn the UPS ON. Press and hold the "STANDBY" button for one second. The alarm will beep once briefly after one second has passed. Release the button. 4 3 12-11-101 93-2442.indb 3 12/4/2012 10:52:40 AM