Tripp Lite SMX1500SLT Owner's Manual for SmartPro SLT UPS 932443 - Page 4

200603172 93-2443 SmartPro update OM.qxd 5/16/2006 3:15 PM Page 4 Optional Installation These connections are optional. Your UPS will function properly without these connections. 1 USB and RS-232 Serial Communications Use the included USB cable (see 1a ) and/or DB9 serial cable (see 1b ) to connect the communication port on your computer to the communication port of your UPS. Install on your computer the Tripp Lite 1a PowerAlert Software appropriate to your computer's operating system. 2 Telephone/Network Protection Jacks Your UPS has jacks that protect against surges over a telephone line or a network dataline. Using telephone or network data cables, connect your wall jack to the UPS jack marked "IN." Connect your equipment to the UPS jack marked "OUT." Make sure the equipment you connect to the UPS's jacks is also 1b protected against surges on the AC line. Not compatible with PoE (Power Over Ethernet) applications. 2 4