Tripp Lite SRCOOL24K Owners Manual - Page 3
Unpacking
View all Tripp Lite SRCOOL24K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Unpacking Note: Make sure the unit and attached pallet is placed on a level surface before unpacking. 1 After removing the protective covering, wrapping, foam insulation and other packing materials (instructions found in the Unpacking Instructions guide attached to the outside of the unit), remove the four bolts A securing the unit to the pallet with an appropriately sized wrench. 1 2 Remove the two shipping brackets by pulling the top lip under and away from the unit B . 2 3 Position at least one person on each side of the unit and slowly push it toward the back of the shipping pallet C until all four casters go over the edge of the pallet and touch the floor. WARNING: Use at least one assistant when removing the unit from the pallet. 3 A B C 3