Tripp Lite SV20KM1P1B Users Guide for WEBCARDLX PowerAlert Device Manager Engl - Page 80
Auto Probes
View all Tripp Lite SV20KM1P1B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
4. Telnet/SSH Console 4.3.3.3 Auto Probes The Auto Probe feature allows for the automatic execution of an action when triggered by an unsuccessful confirmation of network connectivity, using Ping and/or NTP probes. For example, an LX Platform PDU can be configured to ping a router over the network; if the router fails to respond, the PDU will automatically power cycle one of its outlets - to which the router is connected - thereby power cycling the router. When an Auto Probe is added, an event bearing the name of the probe is automatically associated to it. As with other events, actions can be added to the Auto Probe event via the Web or menu interfaces and/or CLI . Email, SNMP trap and logging actions are associated with Auto Probes, as a default Note: This feature is not available with firmware versions before 15.5.2. -------- Remote Services 1- Email Settings 2- Remote Syslog Servers 3- Auto Probes X- Network Configuration M- Return to Main Menu Refresh Menu >> 3 -------- Auto Probes # | Name | Type | Primary Address | Interval | Retries | Status 1 Ping Watchdog Ping 10.22.0.1 3 5 Okay 2 NTP Watchdog NTP 10.22.0.2 15 3 Fault 3 Probe 3 NTP 10.22.0.5 3 5 InitFl 4 Probe 4 NTP 10.22.0.6 15 4 Okay #- Auto Probe 0- Add New Auto Probe X- Remote Services M- Return to Main Menu Refresh Menu >> 1 -------- Auto Probes # | Name | Type | Primary Address | Interval | Retries | Status 1 Ping Watchdog Ping 172.17.48.192 3 3 Okay 2 NTP Watchdog NTP 10.22.0.1 3 3 Off #- Auto Probe 0- Add New Auto Probe X- Remote Services M- Return to Main Menu Refresh Menu >> 2 -------- Auto Probe Detail Menu Type : NTP Name : NTP Watchdog Description : Default Watchdog NTP Probe Primary Address : 10.22.0.1 Primary Port : 123 Secondary Address : 12.22.0.2 Secondary Port : 123 Interval : 3 Retries : 3 Enabled : No 80