Tripp Lite U244-001-R Owners Manual - Page 4

2. Installation 2. For Windows users, the set-up process will begin automatically. For Mac users, an install screen will appear with a Display Link Software Installer link. Click this link to begin installation. Follow the prompts that appear to complete the process. 3. When this process is complete, you will need to restart your computer to finish the installation. 4. After restarting your computer, connect the included USB cable from an available USB 2.0 port to the display adapter. 5. Connect your display adapter to a monitor using a DVI or VGA cable, depending on your adapter/monitor connection type. 6. Once connected, the computer will recognize the display adapter, and complete the installation. The video should now be displayed on the add-on monitor. Note: It may take a few moments before the screen appears on the add-on monitor. Also, it is normal for the screen to flicker on and off a few times when first connected. If the add-on monitor remains blank, you may need to restart your computer one more time. Using Multiple Display Adapters When using multiple display adapters, it is only necessary to install the driver software once. After connecting the first display adapter to the computer, simply move on to connecting the next display adapter. Note: When using Windows Vista XDDM mode, only one display adapter will be able to be configured to use Extended mode, and the remaining display adapters will be forced to use Mirror mode. Windows Vista XDDM mode is a video card driver mode that provides a Windows XP interface on a Vista computer. 3. Using the Adapter 3.1 Display Properties Once installed, the computer video can be Extended from the primary display to the add-on display, Mirrored to display the same thing on both, or changed to use the add-on display as the primary display. This can be done by opening the Display Settings page on your computer (see below) and changing the settings. 4 201108084-93-3099.indd 4 8/12/2011 4:40:38 PM