Tripp Lite USA-49WG Windows Owner's Manual for USA-49WG 4-Port USB Serial Adap - Page 15

7.1 - Appendices · Frequently Asked Questions (FAQs) Frequently Asked Questions · Configuration Examples for Windows Instructions on configuring select serial devices to use Keyspan serial ports · Serial Port Pin Outs Serial Port Pin Out and loopback Test Information · LED Behavior Description of the LED Behavior on your Keyspan Adapter · TX Ack Advance White Paper on the TX Ack Advance feature 7.1.a - Frequently asked Questions (FAQs) The following is a list of Frequently Asked Questions (FAQs) about Keyspan USB 4-Port Serial Adapter: Question: How do I configure my serial device to recognize the Keyspan USB 4-Port Serial Adapter? Answer: To configure any serial device to use a serial port on any Keyspan USB Serial Adapter, you must: 1. Locate the software that controls your serial device. 2. Access that software's port or connection configuration screen/dialog/menu/etc. 3. Select the Keyspan port that your device is connected to in port or connection configuration screen/ dialog/menu/etc. for that device. Depending on what type of serial device you have, you may have to configure a control panel, an application, or a plug-in. Question: Can I connect my Keyspan USB device to a USB hub? Answer: Yes, any Keyspan USB device can be connected to a USB hub. However, there are some USB hubs that cannot fully support some USB devices. If you are having problems with a Keyspan USB device that is connected to a USB hub, please connect the Keyspan USB device to a built-in USB port on your computer. If this solves the problem, then this may be an issue with your USB hub. 15