Turtle Beach Ear Force X42 User's Guide - Page 5

XBOX 360® Setup XBOX 360 (Newer Models) 1. Connect the Digital Optical Cable NOTE: Remove the protective caps from each end of the optical cable before inserting it into the sockets. 2. Connect the Transmitter Power XBOX 360 (Older Models)* 1. Connect the Digital Optical Cable* (Requires XBOX 360 HDMI Audio Adapter, sold separately) NOTE: Remove the protective caps from each end of the optical cable before inserting it into the sockets. 2. Connect the Transmitter Power 3. Insert the Headset Batteries as shown: Right Ear Cup: To remove the battery cover, slide downward. CAUTION: Be sure to insert batteries as shown. 3 + AAA BATTERY + AAA BATTERY - CONSOLE DIGITAL OUT 4. Insert the Microphone Boom: 1 1 Insert the boom so that the holes in the mic casing and the marker on the jack are facing your mouth. 4 2 2 *XBOX 360 HDMI Audio Adapter cable required (sold separately). If your HDTV has an optical AUDIO OUT jack, you can use it to connect the optical cable to the transmitter. 5 5. Turn on the headset by pressing and holding the power button until you hear a tone, then release. POWER 5 ON - BAESFSFEBCOTOSST - OFF 6