Turtle Beach Ear Force X42 User Manual - Page 4

X42 Headset POWER 1 6 5 ON - BAESFSFEBCOTOSST - OFF 2 3 4 7 1 1 Power Button: To turn on the headset, press and hold the power button for a couple of seconds, then release. You will hear 2 beeps and the power LED should start flashing. Turn off the headset by pressing the button until the LED stays on and you hear 2 beeps, then release. To enter Pairing Mode, power off the headset, then press and hold the power button for about 6 seconds until you hear the second double beep and the LED begins to flash rapidly (see pg 4). The headset will turn off after several minutes if there's no audio detected or if the transmitter is turned off. 2 Xbox Controller Jack: Insert the straight connector on the Talkback Cable here. (see pg. 8) 3 Effects Button: Press this button to activate the different EQ presets. A beep will indicate which preset is selected. (see pg. 14) 4 Game Volume: Turn to adjust the game sound level. The Xbox LIVE chat volume may be independently set by the volume control on the Talkback Cable. 5 Power LED: Flashes about once per second when power is on. Flashes quickly (twice per second) when in Pairing Mode (see pg. 4). 6 Microphone jack: Insert the removable mic boom here. The jack is notched to prevent the boom from rotating after insertion. 7 To properly position the mic: To properly position the mic: Remove the foam cover, then insert the boom into the jack so the holes on the mic casing are facing your mouth. Then replace the foam cover. The boom plug also has a marker to indicate the proper mic position.