URC URC-A6 Owners Manual - Page 13
Programming URC-A6, using the Learning Method
View all URC URC-A6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
If Auto Search did not work, try this: Programming URC-A6 using the Learning Method STEP 1: LineuptheURC-A6totheremotecontrolyou want to 'learn' from, head--to--head as shown below. Make sure the heads are one to two inches apart. STEP 2: On the URC-A6, press the Component button that you want to program (in this case the button that says TV) and the ENTER [ENT] button at the same time. Hold down both buttons for 2 seconds until the TV Component button light turns on. This signals that you are in programming mode. IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over. STEP 3: Press any button on the URC-A6 that you want to teach a command to. For example, if you want to teach the MUTE button on the URC-A6 the TV Mute command from the other remote, first press the MUTE button on the URC-A6 and the TV component button LED light will blink once indicating that the URC-A6 is ready to learn the command. STEP 4: Press and hold the MUTE button on the other remote until the component button LED on the URC-A6 blinks twice. Now you can continue learning all other buttons from your old remote by pressing the next button on the URC-A6 and repeating this step. Note: The component LED will blink five times if there was an error in the learning process. In this case, please repeat Steps 3 and 4. Page 13