URC URCL-9640-XXXX 500 Series Lighting Brochure - Page 4

URC 500 Series Receptacles 15A, 1/2 HP 120V/AC, 60 Hz ballast, incandescent, inductive tungsten Receptacles The URC 500 Series split receptacle replaces regular receptacles to provide local and remote RF ON/OFF control of a single outlet. Moreover, the receptacle provides other programmable functions (scenes, events, association, etc.) when used with a URC or other Z-Wave Plus compliant controllers. The receptacle can be manually and remotely controlled by commands sent from an URC controller or other Z-Wave Plus compatible controllers or programs. A URC 500 Series RF Duplex Receptacle utilizes existing 120V/AC 60Hz standard house wiring and fits into a standard wall box. No new wiring needed. COMMON KEY FEATURES • Provides control of one outlet leaving the other one for normal use • Complies with 2011 NEC® section 406.12 specification that states all receptacles installed in dwelling units must be tamper resistant (dwelling units are defined in NEC® Article 210.52) • UL listed safety shutter system prevents insertion of foreign objects into receptacle • Ability to be controlled remotely by other Z-Wave devices through association • Patented built-in wire stripper for #14 and #12 wire to speed installation • Electro-mechanical push button located at center of device for inclusion and ON/OFF operation • Blue LED at center illuminates to indicate ON/OFF status (LED is dimmable) • Panic mode for increased security and integration with security systems • Single button programming • Patented indicator system alerts if receptacle is not set up on the network • Configurable "power up state" • Available in White, Black and Light Almond SPECIFICATIONS Performance Maximum amperage for receptacle: 15A Rating: 120V/AC, 60Hz Horsepower rating: 1/2 HP (9.8A) Performance Consideration A URC Z-Wave Plus enabled device must be within a range of 30-328 feet (maximum range is open air) of another Z-Wave enabled device to participate in a Z-Wave wireless mesh network. Any one dimmer or switch can be associated with up to 5 devices (dimmers, switches, receptacles, or plug-in modules) Terminations Receptacle has three 6" pre-stripped wire leads for line, ground and neutral 4