URC Vivido-Dimmers Cutsheet - Page 6

RF Receptacle

Page 6 highlights

RF Receptacle RF Duplex Receptacle 15A, 1/2 HP 120V/AC, 60 Hz ballast, incandescent, inductive tungsten The Vivido split receptacle replaces regular receptacles to provide local and remote RF ON/OFF control of a single outlet. Moreover, the receptacle provides other programmable functions (scenes, events, association, child lockout, etc.) when used with a URC or other Z-Wave® compliant controllers. The receptacle can be manually and remotely controlled by commands sent from an URC controller or other Z-Wave compatible controllers or programs. A Vivido RF Duplex Receptacle utilizes existing 120 V/AC 60Hz standard house wiring and fits into a standard wall box. No new wiring needed. KEY FEATURES • Provides control of one outlet leaving the other one for normal use • Complies with 2011 NEC® section 406.12 specification that states all receptacles installed in dwelling units must be tamper resistant (dwelling units are defined in NEC® Article 210.52) • Offers UL listed safety shutter system that prevents insertion of foreign objects into receptacle • Ability to be controlled remotely by other Z-Wave devices through association • Patented built-in wire stripper for #14 and #12 wire to speed installation • Electro-mechanical push button located at center of device for inclusion and ON/OFF operation • Blue LED at center illuminates to indicate ON/OFF status • Child Lockout feature • Panic mode for increased security & integration with security systems • Single button programming • All-ON/All-OFF inclusion • Patented indicator system alerts if receptacle is not set up on the network • Configurable "power up state" • Available in White, Black and Light Almond SPECIFICATIONS Performance Performance Consideration Terminations Maximum amperage for receptacle: 15A Rating: 120V/AC, 60Hz Horsepower rating: 1/2 HP (9.8A) A URC Z-Wave enabled device must be within 30 feet of another Z-Wave enabled device to participate in a Z-Wave wireless mesh network. Any one dimmer or switch can be associated with up to 5 devices (dimmers, switches, receptacles, or plug-in modules) Receptacle has three 6" pre-stripped wire leads for line, ground and neutral 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

6
RF Receptacle
The Vivido split receptacle replaces regular receptacles to provide local and remote
RF ON/OFF control of a single outlet. Moreover, the receptacle provides other
programmable functions (scenes, events, association, child lockout, etc.) when
used with a URC or other Z-Wave® compliant controllers. The receptacle can be
manually and remotely controlled by commands sent from an URC controller
or
other Z-Wave compatible controllers or programs. A Vivido RF Duplex Receptacle
utilizes existing 120 V/AC 60Hz standard house wiring and fits into a standard wall
box. No new wiring needed.
RF Duplex Receptacle
KEY FEATURES
Provides control of one outlet leaving the other one for normal use
Complies with 2011 NEC® section 406.12 specification that states all receptacles installed in
dwelling units must be tamper resistant (dwelling units are defined in NEC® Article 210.52)
Offers UL listed safety shutter system that prevents insertion of foreign objects into receptacle
Ability to be controlled remotely by other Z-Wave devices through association
Patented built-in wire stripper for #14 and #12 wire to speed installation
Electro-mechanical push button located at center of device for inclusion and ON/OFF
operation
Blue LED at center illuminates to indicate ON/OFF status
Child Lockout feature
Panic mode for increased security & integration with security systems
Single button programming
All-ON/All-OFF inclusion
Patented indicator system alerts if receptacle is not set up on the network
Configurable “power up state”
Available in White, Black and Light Almond
Performance
Maximum amperage for receptacle: 15A
Rating: 120V/AC, 60Hz
Horsepower rating: 1/2 HP (9.8A)
Performance Consideration
A URC Z-Wave enabled device must be within 30 feet of another Z-Wave enabled device to participate in a Z-Wave wireless mesh
network. Any one dimmer or switch can be associated with up to 5 devices (dimmers, switches, receptacles, or plug-in modules)
Terminations
Receptacle has three 6” pre-stripped wire leads for line, ground and neutral
SPECIFICATIONS
15A, 1/2 HP
120V/AC, 60 Hz
ballast, incandescent, inductive
tungsten