Uniden 9380 English Owners Manual - Page 17
Connecting the Base and Charging the Handset, Installing the Belt Clip, AD-800 AC adapter.
UPC - 050633260814
View all Uniden 9380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Connecting the Base and Charging the Handset ) Connect the AC adapter to the DC IN 9V jack. CAUTION: To avoid risk of fire and shock, only use the Uniden AD-800 AC adapter. 2) Connect the AC adapter to a standard 120V AC wall outlet. DO NOT use an AC outlet controlled by a wall switch. 3) Place the handset in the base with the LCD screen facing forward. 4) Make sure that the charge LED illuminates. If the LED does not illuminate, check to see that the AC adapter is plugged in and the handset makes good contact with the charging contacts. 5) Charge your handset at least 15 to 20 hours before plugging into the phone line. To AC outlet To DC IN 9V AC adapter (supplied) Installing the Belt Clip Line up the holes on each side of the handset. To attach the belt clip, insert into the holes on each side of the handset. Press down until it clicks. To remove the belt clip, pull either side of the belt clip to release the tabs from the holes. 16