Uniden ANA9610 English Owners Manual - Page 15
Connecting the Telephone Cords
View all Uniden ANA9610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Connecting the Telephone Cords The ANA 9610 must be connected to an analog PBX port or a standard analog telephone line. CAUTION: n Never install telephone wiring during a lightning storm. n Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. n Use caution when installing or modifying telephone lines. Line in From Telephone Jack You can also connect a standard 2500-type desk phone to the ANA 9610: To Optional 2500-type Telephone Connect to the LINE OUT Jack
Connecting the Telephone Cords
The
ANA 9610
must be connected to an analog PBX port or a
standard analog telephone line.
CAUTION:
Never install telephone wiring during a lightning storm.
Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected at the network interface.
Use caution when installing or modifying telephone lines.
You can also connect a standard 2500-type desk phone to the
ANA 9610
:
9
Line in
From
Telephone
Jack
To Optional
2500-type
Telephone
Connect to the LINE OUT Jack