Uniden BC235XLT English Owners Manual - Page 56
Troubleshooting, If your, is not performing properly, try the, following steps.
View all Uniden BC235XLT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Troubleshooting If your BC 235XLT is not performing properly, try the following steps. Problem Suggestion Scanner won't work. 1. Check the connections at both ends of the AC Adapter. 2. Turn on the wall switch of your room. You could be using an outlet controlled by the wall switch. 3. Move the AC Adapter to another wall outlet or replace the battery pack. Improper reception. 1. Check the antenna connection or move and reposition the antenna. 2. Move the scanner. 3. You may be in a remote area which could require an optional multi-band antenna. Check with your dealer or local electronics store. Scan won't stop. 1. Adjust squelch threshold - refer to page 15, Setting the Squelch. 2. Check the antenna connection. 3. Check to see if many of the channels are locked out. If so, the scanner has less chance of finding an active channel. Scan won't start. Weather Scan won't work. 4. Review each channel's frequency to see if it is still stored in memory and is correct. 5. It's possible that none of the programmed frequencies are currently active. 1. Press the S key again. 2. Adjust the SQUELCH control. 3. Check to see if all channels are locked out. 1. Adjust squelch threshold - refer to page 15, Setting the Squelch. 2. Check the antenna. 56