Uniden BC244CLT English Owners Manual - Page 16
Programming Tips - how to program a scanner
View all Uniden BC244CLT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
5. The scanner automatically starts scanning. If you have not programmed any channels yet, press WX to hear your local weather broadcast. 6. Adjust VOLUME to a comfortable listening level. Programming Tips s Program one frequency per channel. s Channel 1 is the location of the default priority channel. Program the most important frequency, or the one of major interest, into Channel 1. You may also select any other channel to be the priority channel. s To quickly program a series of channels, start with the lowest number channel. For example, when you are programming five new frequencies into Channels 4 through 8, start with Channel 4. After you complete the programming in one channel (by pressing E), press MANUAL to step up to the next channel. s If you make an error during programming, or the frequency is out of range, E r ro r appears on the frequency display. s If you program the same frequency in two channels, the display will indicate the channel with the duplicate frequency. If you want to have two of the same frequencies on different channels, accept the entry by pressing E again. s During numeric entry, if you know that you pressed the wrong number, press . (decimal point) until the entry is cancelled out. When the previous frequency is displayed, you may re-enter the frequency. s Above 406MHz, the frequency steps are in 12.5kHz increments. To enter a frequency such as 450.4875, press each of the seven digits in sequence. If All Loc Out appears in the display, when you first turn the scanner on, this indicates that all the channel information has been manually erased. All channels are set to 0.0MHz. To clear this message, program the frequency and channel information as desired. 13