Uniden BCT10 English Owners Manual - Page 12
Connecting the Power - bct 10 power cord
View all Uniden BCT10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Connecting the Power Direct Connection WARNING: The BCT-10 is designed to operate only with 12V DC, negative ground power systems. Operation of the unit on other voltages or polarities will cause damage to the unit and may create a fire hazard. The straight power cord provided with the unit has bare wires at one end, and a small connector at the other end. 1. Connect the positive wire to a 12V DC source in your vehicle's fuse box. 2. Connect the other wire to ground. 12 OFF HIGHWAY SYSTEM ALARM HOLD MUTE MODE L/0 STATE Fuse Box
Connecting the Power
Direct Connection
WARNING:
The BCT-10 is designed to operate only with 12V DC,
negative ground power systems. Operation of the unit
on other voltages or polarities will cause damage to
the unit and may create a fire hazard.
The straight power cord provided with the unit has bare wires at
one end, and a small connector at the other end.
1.
Connect the positive wire to a 12V DC source in your vehicle’s
fuse box.
2.
Connect the other wire to ground.
MUTE
MODE
ALARM
L/0
HOLD
STATE
HIGHWAY
SYSTEM
OFF
Fuse
Box
12