Uniden BT229 English Owners Manual - Page 5

1) Make sure the headset is powered off and the power adapter is not connected (you can't use the headset while it's charging). ) Press and hold MFB until the LED flashes alternating red and blue (approximately 6 seconds), then release. The headset is in pairing mode and should be visible to other Bluetooth devices. ) On your phone, start a search for Bluetooth headsets or handsfree devices. (This process may take several seconds, and it will be different for each phone; see your phone's manual for detailed instructions.) ) Your phone should discover a device called a BT229 or BT229 headset, When your phone asks if you want to pair with this device, answer yes. 5) When your phone prompts you for a PIN code or password to pair with the BT229 enter 0000. 6) When the headset is paired, the blue LED flashes twice every 5 seconds; your phone might also display a confirmation message. If the blue LED flashes once every 5 seconds, the headset is not paired. Try the pairing procedure again.