Uniden CLX485 English Owners Manual - Page 79
Symptom, Suggestion
UPC - 050633260289
View all Uniden CLX485 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Symptom Suggestion • The call was placed through a switchboard. The Caller ID does not display. • Call your local telephone company to verify your Caller ID service is working properly or if there has been a temporary service interruption. You cannot register the handset at the base. • Charge the battery pack in the handset for 10 hours. • Change the Digital Security Code (see page 14). The handset does not communicate with other handsets. • Change the Digital Security Code (see page 14). • Make sure that you have registered all handsets. An extra handset is not able to • Make sure there are not 2 handsets already using the conference feature. join the conversation. • Make sure that another handset is not in privacy mode. The Room Monitor feature does not work. • Make sure to place the handset(s) within the range of the base. The answering machine does not work. • Make sure the base unit is plugged in. • Make sure that the answering machine is turned on. • Make sure that the message record time is not set to Announce only (see page 60). Messages are incomplete. • The incoming messages may be too long. Remind callers to leave a brief message. • The memory may be full. Delete some or all of the saved messages. No sound on the base unit or handset speaker during call monitoring or message playback. • Adjust the speaker volume on the base unit or handset. • Make sure the call screen feature is set to on. Troubleshooting www.uniden.com Troubleshooting [ 7 8 ]