Uniden CLX502 English Owners Manual - Page 10
Connect the base and charge the handset
View all Uniden CLX502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Setting up the Phone Connect the base and charge the handset 1) Connect the AC adapter to the DC IN 9V jack. Place the base close to the AC outlet to avoid long extension cords. 2) Connect the AC adapter to a continuous power supply (i.e., an outlet that is not controlled by a switch). 3) Place the handset in the base with the display facing forward. 4) Make sure that the charge LED illuminates. If the LED does not illuminate, check to see that the AC adapter is plugged in and the handset makes good contact with the base charging contacts. 5) Charge your handset at least 15 hours before plugging into the phone line. 6) Once the handset battery pack is fully charged, connect the telephone line cord to the TEL LINE jack and to a telephone outlet. note •Use only the supplied AD-0006 AC adapter. Do not use any other AC adapter. •Do not place the power cord where it creates a trip hazard or where it could become chafed and create a fire or electrical hazard. •Don't place the base in direct sunlight or subject it to high temperatures. The battery may not charge properly. If your telephone outlet isn't modular, contact your telephone company. [ 9 ] Setting up the Phone www.uniden.com