Uniden D1364 User Guide - Page 10
Troubleshooting
View all Uniden D1364 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Troubleshooting Problems I can't make or receive calls. The handset won't ring. The handset is not working. The handset won't display CID information. I hear a beeping during a call. Possible solutions xxCheck the telephone cord connection. xxDisconnect the base AC adapter. Wait a few minutes, then reconnect it. xxMake sure the base is plugged in. xxMake sure the ringer is turned on. xxCharge the battery for 15-20 hours. xxCheck the battery connection. xxLet calls ring twice before answering. xxMake sure your CID service is active. xxThe battery is getting low. Check the handset for a low battery alert. Finish your conversation and return the handset to the cradle as soon as possible. There's a lot of noise or static on the line xxCheck for interference from appliances (microwave ovens, TVs, etc.) or wireless devices (baby monitors, WiFi equipment, etc.). Move the handset or base away from the interference source. xxMove the handset closer to the base. xxTurn the T-coil on for telecoil hearing aids (see p. 6). Installing a Line Filter or DSL Filter xxA telephone line filter or DSL filter prevents services that use the phone line from causing interference on your phone. To get a line filter, contact your service provider or look in an electronics store. xxPlug the filter into the telephone wall jack and plug the base into the filter. Make a test call to make sure the noise is gone. Liquid Damage CAUTION: If the base is covered in liquid, disconnect the adapter and phone cord from the wall before touching it. 10 - English If the liquid is only on the exterior housing of the base or handset, wipe it off and use as normal. If you can hear liquid inside the housing: 1. Remove all compartment covers, and disconnect all cables and cords. 2. If liquid is leaking from any vent or hole, turn the phone so that vent faces down. If not, place the largest vent face down. 3. Let dry for at least 3 days. Check for liquid inside the phone before replacing compartment covers and reconnecting cords.