Uniden D2998 English Owners Manual - Page 5

Set Up the Accessory Handset(s), Install and Charge the Battery, Test the Connection

Get Uniden D2998 PDF manuals and user guides
UPC - 050633273630
View all Uniden D2998 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

Set Up the Accessory Handset(s) Install and Charge the Battery 1. Unpack all handsets, battery packs, and battery covers. If any handset has the battery cover already attached, press in on the notch and slide the cover down and off. 2. Line up the battery pack connector with the jack inside the handset. (The battery connector will only fit one way.) 3. Push the battery pack connector in until it clicks into place. Tug gently on the wires to make sure the battery pack is securely connected. 4. Place the batter cover and slide it up into place. 5. Use an AC adapter to connect the power jack on each charger to a regular indoor (120V AC) power outlet. 6. Place each handset in a charger with the display facing forward. If the charge light on the charger doesn't light up, reseat the handset or connect the charger to a different outlet. ##Charge all handsets completely (about 15 hours) before using them. Test the Connection Pick up each handset and press Talk/end. You should hear a dial tone, and the display should say Talk. (Press Talk/end again to hang up.) If there is noise or static, see p. 22 for tips on avoiding interference. English - 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
English - 5
Set Up the Accessory Handset(s)
Install and Charge the Battery
1. Unpack all handsets, battery packs, and battery covers.
If any handset has the battery cover already attached,
press in on the notch and slide the cover down and
off.
2. Line up the battery pack connector with
the jack inside the handset. (The battery
connector will only fit one way.)
3. Push the battery pack connector in until it
clicks into place. Tug gently on the wires to make sure the battery pack is
securely connected.
4. Place the batter cover and slide it up into place.
5. Use an AC adapter to connect the power jack on each charger to a regular
indoor (120V AC) power outlet.
6. Place each handset in a charger with the display facing forward. If the
chargE
light on the charger doesn’t light up, reseat the handset or connect
the charger to a different outlet.
#
Charge all handsets completely (about 15 hours) before using them.
Test the Connection
Pick up each handset and press
TALK/END
. You should hear a dial tone, and the
display should say
Talk
. (Press
TALK/END
again to hang up.)
If there is noise or static, see p. 22 for tips on avoiding interference.