Uniden D3280 English Owners Manual - Page 22

The phone keeps ringing when I answer on an extension.  You may have to change the line mode. Contact Customer Service for instructions. Audio issues Possible solutions Callers sound weak or soft.  Move the handset closer to the base.  Keep the handset's battery fully charged.  Increase the earpiece volume. There's a lot of noise or static on the line  Check for interference from appliances (microwave ovens, TVs, etc.) or wireless devices (baby monitors, WiFi equipment, etc.). Move the handset or base away from the interference source.  If you use a telecoil hearing aid, turn on T-coil mode (see p. 8).  If you have any service that uses the phone line, add a DSL or telephone line filter (see p. 23). Caller ID problems Possible solutions No handsets display Caller  Let calls ring twice before answering. ID information.  Make sure your Caller ID service is active. Caller ID displays briefly and then clears.  You may have to change the line mode. Contact Customer Service for instructions. Multi-handset problems I can't transfer calls. Two handsets can't talk to a caller. Possible solutions  Reset the handset (see p. 23).  See if any handset is in Privacy Mode. A handset says Unavailable.  Move the handset closer to the base.  See if any handset is in Privacy Mode. I can't register a new handset. Answering system problems The answering system does not work. The system won't record messages. A handset can't access the answering system.  Reset the handset (see p. 23).  See if you have 12 registered handsets. Possible solutions  Make sure the answering system is on.  Make sure the base is plugged in.  See if Record Time is set to Announce Only.  Delete messages (memory may be full).  See if another handset is using the system.  Make sure the phone is in standby. My outgoing message is gone.  If there was a power failure, re-record your personal outgoing message. I can't hear the base speaker.  Make sure call screening is turned on.  Change the base speaker volume. Messages are incomplete.  Increase the Record Time.  Delete messages (memory may be full). The system keeps recording when  You may have to change the line mode. Contact I answer on an extension. Customer Service for instructions. 22 - English