Uniden DCT4960-2 English Owners Manual - Page 15
C. Connect the base unit
View all Uniden DCT4960-2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
GETTING STARTED C. Connect the base unit 1) Connect the AC adapter to the DC IN 9V jack to a standard 120V AC wall outlet. 2) Set the base and charger on a desk or tabletop, and place the handset in the base unit as shown. 3) Make sure that the charge LED lights up. If the LED does not light up, check to see that the AC adapter is plugged in and that the handset makes good contact with the base charging contacts. • Use only the supplied AD-490 AC adapter. Do not use any other AC adapter. • Connect the AC adapter to a continuous power supply. • Place the base unit close to the AC outlet so that you can unplug the AC adapter easily. INSTALLING AND ADJUSTING • After installing the battery pack in the handset, charge your handset at least 12-15 hours before plugging into the phone line. Once the handset battery pack is fully charged, connect the telephone line cord to the base and telephone wall outlet. 4) Connect the telephone line cord to the TEL LINE jack and to a telephone outlet once the handset is fully charged. If your telephone outlet isn't modular type, contact your telephone company for assistance. Modular Place the power cord so that it does not create a trip hazard or where it could become chafed and create a fire or electrical hazard. GETTING STARTED [ 9 ]