Uniden DCT5285 English Owners Manual - Page 7

Step 1 Charging the Batteries Step 2 Connecting INSTALL THE AA BATTERIES Remove the cover. CONNECT TO A PHONE LINE When the handset batteries are fully charged, plug the telephone cord into the base unit and then into a telephone wall jack. Install the batteries supplied with your phone, observing the correct polarity. Replace the cover. PLUG INTO AC POWER Plug the AC adapter cord into the base unit and then to a 120V AC outlet. Your phone is set for tone dialing. If your local network requires pulse dialing, please see "Setting the Dial Mode" on page 30. Place the handset in the base. You must charge the batteries Note: continuously for 17-20 hours before using the phone. Step 3 Using the Phone TO SELECT CALLER ID OPTIONS SUN 12:00A Handset #1 New: 5 MENU CID RDL PB Press the MENU soft key in the standby mode. Press volume/ L or M to select "Global Setup", then the OK soft key. Press volume/ L or M to select "CIDCW", then the OK soft key. Press volume/ L or M to select "CW On/CWDX On", "CW On/CWDX Off", or "CW Off/CWDX Off", then the OK soft key. TO CHOOSE THE LANGUAGE Press the MENU soft key in the standby mode. Press volume/ L or M to select "Handset Setup", then the OK soft key. Press volume/ L or M to select "Language", then the OK soft key. Press volume/ L or M to choose a Language, then the OK soft key. Step 4 Setting up Answering System TO TURN THE ANSWERING SYSTEM ON/OFF Each time ans on is pressed, the answer mode is switched between On and Off. TO SET GREETING MESSAGE Press and hold greeting. Start recording your message. Position yourself as near to the base as possible. When finished, press greeting or . QUICK REFERENCE GUIDE [ 5 ] QUICK REFERENCE GUIDE