Uniden DCT648 English Owners Manual - Page 70

note 4-Way Conferencing Fourth person, at either the handset or the base, may be added to the conference call. For example, to add a fourth party to an ongoing conference call at the base or another handset, press talk/flash on the fourth party's handset (or (speaker) on the base). To remove either caller from your conversation, press end on the party's handset (or (speaker) on the base). The other parties will still be connected to the call. •If the party is busy or out of range, the handset returns to standby mode. •If any of the following occurs while selecting the other handset (or the base), the operation will be canceled. - Press talk/flash or speaker. - Receive an outside/ intercom call or page. •When the party does not answer within one minute, the operation is canceled. •Standby Mode The handset is not in use and talk/flash has not been pressed. Intercom/Call Transfer Feature Intercom and Call Transfer features are available for your phone. Intercom From handset to handset or to the base 1) Press hold/transfer/int'com in standby mode. 2) Select the base or the handset you want to talk with from the selection list within 30 seconds. To select the handset (or the base), press ring/vol/∧ or ring/vol/∨, and then press select/ . If you select All, all handsets and the base will be paged. An intercom tone sounds. 6QKPVGTEQO *CPFUGV *CPFUGV 3) On the receiving handset (or the base), to answer the call, press talk/flash or hold/ transfer/int'com (or intercom/find handset or (speaker) on the base). Or press any number key,*/tone/←, or #/→ (when Any Key Answer is on), or pick up the handset from the cradle (when AutoTalk is on). 4) To hang up the intercom call, press end on either handset (or intercom on the base). EXPANDING YOUR PHONE [68] EXPANDING YOUR PHONE www.uniden.com