Uniden DCT748-2 English Owners Manual - Page 15
Register the Handset - model 4
View all Uniden DCT748-2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
GETTING STARTED Register the Handset If you purchase an expansion handset, you need to register the handset before use. Only one handset can be registered at a time. note Handsets supplied with the phone are registered to the base by the factory. When charged, pre-registered handsets display a handset ID number. Handsets that have not been registered display Models vary! Charge handset on the base for registration or refer to Owner's Manual. When you register an extra handset to the base, the handset ID will be assigned. For the DCX700 expansion handset 1) Before registering the extra handset, the battery pack MUST be charged for 15-20 hours. 2) Place the extra handset in the main base unit to begin registration. 3) While the handset is registering, Handset Registering will appear in the LCD. When Registration Complete is displayed, the handset has been registered to the base. If Registration Failed appears, please try these steps again. For the DCX640 expansion handset (DCT7 seriescompatible model) 1) Disconnect the AC adapter. 2) While holding find hs/ and on the base, connect the AC adapter. Keep pressing find hs/ and on the base until the CHARGE LED starts to blink. 3) On the handset, press and hold # until you hear beep. Your phone may be compatible with other Uniden 2.4GHz Digital Expandable Systems. Please visit our website at www.uniden.com for model number confirmation or call our customer service at (800) 297-1023. www.uniden.com GETTING STARTED [14]