Uniden DCT756 English Owners Manual - Page 50

Symptom Can't make or receive calls. The handset doesn't ring or receive a page. Severe noise interference. The Caller ID does not display. You cannot register the handset at the base. The handset doesn't communicate with other handsets. An extra handset can't join the conversation. Suggestion • Make sure you are not too far from the base. • Make sure the line is not in use. If an outside call is already using a line, you cannot use that line to make another outside call. • Check both ends of the base telephone line cord. • Make sure the AC adapter is plugged into the base and wall outlet. • Disconnect the AC adapter and reconnect. • Change the Digital Security Code (see page 49). • Make sure that you are not too far from the base. • Charge the battery in the handset for 15 to 20 hours by placing the handset on the base or charging cradle. • Change the Digital Security Code (see page 49). • Keep the handset away from microwave ovens, computers, remote control toys, wireless microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical appliances. • Move to another location or turn off the source of interference. • The call was placed through a switchboard. • Call your telephone provider to verify your Caller ID service is corrent. There may be a problem with your Caller ID service. • Charge the battery pack in the handset for at least . 15 to 20 hours. • Change the Digital Security Code (see page 49). • Change the Digital Security Code (see page 49). • Make sure you have registered all handsets. • Make sure there are not 2 handsets already using the conference feature. • Make sure that another handset is not in privacy mode. 50