Uniden DCT758 English Owners Manual - Page 48

Setting the Day & Time If you do not set the clock on your answering system, your messages may not have the correct time and day stamp. You can set the day and time from the handset or the base. From the base 1. Press [menu/clock]. From the handset 1. Press [menu/clear]. 2. Press [ /select] or [ /select] until the correct day is announced and the message counter shows the corresponding number (1 for Sunday, 2 for Monday, etc.). 3. Press [set] to select the day. 2. Move the cursor to GLOBAL SETUP and press [select/ ] . 3. Move the cursor to DAY & TIME and press [select/ ] . 4. Press [ /select] or [ /select] until you hear the correct hour setting. The numbers 1 through 12 appear on the base as each hour is announced. 4. Use [ ] and [ ] to select the correct day, and press [select/ ] . 5. Press [set] to select the hour. 6. Press [ /select] or [ /select] until you hear the correct minute setting. The numbers 00 through 59 appears on the base as each minute is announced. 7. Press [set] to select the minute. 5. Use [ ] and [ ] to select the correct hour, and press [select/ ] . 6. Use [ ] and [ ] to select the correct number of minutes, and press [select/ ] . 8. Press [ /select] or [ /select] until you hear the correct AM or PM setting. The message counter displays A or P. 9. Press [set] to select the AM/PM setting. A confirmation tone sounds, and the day and time are announced for your review. 7. Use [ ] and [ ] to select AM or PM, and press [select/ ] . You hear a confirmation tone. 47