Uniden DCT7585 English Owners Manual - Page 40
Muting the Microphone, Privacy Mode, Seven-Digit Dialing
UPC - 050633320525
View all Uniden DCT7585 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Muting the Microphone Mute turns off the microphone so the caller can't hear you. This only works while you are on a call. From the base . Press [mute] ([mute/find hs] on the dualkeypad base). The speaker LED blinks while muting is on. 2. To cancel muting, press [mute] or [mute/find hs] again. The speaker LED stops blinking. From the handset . Press [menu/clear]. 2. Move the cursor to select MUTE and then press [select/ ]. MUTE ON and appear in the display; remains while muting is on. 3. To cancel muting, repeat the procedure, MUTE OFF appears. Privacy Mode If you don't want other stations to interrupt your call, turn on privacy mode. As long as your handset is in privacy mode, other stations can't join your call or make any calls of their own: their displays will show UNAVAILABLE. . While on a call, press [menu/clear]. 2. Move the cursor to PRIVACY MODE, and then press [select/ ]. PRIVACY MODE ON and appear in the display for 2 seconds; the icon remains in the display as long as privacy mode is on. To turn privacy mode off, repeat the procedure listed above. Seven-Digit Dialing If you can make a local call by dialing only 7 digits (instead of 10), you can program your local area code in your phone. Calls that come from within your area code will show only the 7-digit phone number; calls from outside your area code will show all 10 digits. To enter an area code, follow the steps below: . Press [menu/clear]. Select the GLOBAL SETUP menu, and then the AREA CODE submenu. 2. Use the number keypad ([0] through [9]) to enter a 3-digit area code. If an area code has already been stored, it appears in the display. Press [menu/clear] to delete the stored code, and then enter a new one. 3. Press [select/ ]. You will hear a confirmation tone. 39