Uniden DCX100 English Owners Manual - Page 6
De-register a Handset or a Base
UPC - 050633271049
View all Uniden DCX100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
On the handset you want to register: Enter the base PIN code. Pre-set base PIN code is 0000. You will hear a confirmation tone when registration is complete. When in standby mode, the new handset number will be displayed. The handset will automatically be allocated with the next available handset number. If registration is unsuccessful, the display will show Not Registered and you will need to follow the registration procedure again. De-register a Handset or a Base If you have more than one handset registered to your base or more than one base registered to your handset(s), you can deregister both the handset from the base or the base from the handset. Before deregistering, make sure all handsets and the base are in standby mode. 1 Press to access the main menu. 2 Press or until Add. Settings is displayed and press . 3 Press or to display Deregister and press . 4 Press or to select Handset or Base and press . 5 Press or to display the handset or base you want to de-register and press . 6 Press or to select Yes and press . If the handset has been registered to the base successfully, you will hear a confirmation tone. 7 Press to exit and return to standby. • You can register a handset to up to 4 bases, e.g. one at work and one at home, and switch between them. [5]