Uniden DCX200RED English Owners Manual - Page 3
Compatible Bases, Installing the Accessory Handset - cordless phone
View all Uniden DCX200RED manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Compatible Bases This handset is compatible with Uniden's 1.9 GHz DECT6.0 Expandable phone system: the DECT2000 series. Please visit our website at www.uniden.com for the most up-todate list of compatible bases. Installing the Accessory Handset Checking the Package Contents Make sure your package contains the following items. If any items are missing or damaged, contact our Customer Service Hotline. See inside the back cover page for contact information. • Cordless Handset • Belt Clip • Charger • Printed Material • AC Adapter (model # AD-0005: Input 120V AC, 60 Hz; Output 9V DC, 210 mA) • Rechargeable NiMH Battery Pack (model # BT-1008: Capacity 650 mAh, 2.4V) Installing the Battery Follow the steps below to install the rechargeable battery pack. ) Using the finger indentation, press in on the battery case cover and slide it down to remove it. 2) Plug the battery connector into the battery compartment jack. Be sure to match the red and black wires to the label near the jack. 3) Gently pull on the battery wires. If the battery connector comes loose, try connecting it again. 4) Replace the battery case cover and slide it up until it clicks into place. Note: Use only the Uniden BT-1008 rechargeable battery pack supplied with your cordless telephone.