Uniden DCX770 English Owners Manual - Page 4

Step 2: Register the Handset YOU NEED TO REGISTER THE DCX770 TO A MAIN BASE BEFORE USE! 1 Be sure the handset battery is fully charged. 2 With the main base in standby mode (i.e., not being used), place the handset in the main base to begin registration. For compatible models in the DCT6 and DCT7 series: 1)Disconnect the AC adapter. 2)While holding the following key, connect the AC Adapter: DCT646 & DCT746 models - find handset DCT6465 & DCT6485 models - intercom DCT648 models - intercom/find handset DCT748 models - find/skip Keep pressing the key until the CHARGE LED starts to blink. 3)On the handset, press and hold # until you hear beep. For compatible models in the DCT7488 series: 1)Press the MENU soft key in the standby mode. 2)Select HS Registration , and press the OK soft key. 3)On the handset, press and hold # until you hear beep. 3 While the handset is registering, Handset Registering will appear in the handset LCD. When Registration Complete is displayed, the handset has been registered to the base. If Registration Failed appears, please try these steps again. De-register the handset 1)Press and hold end and # for more than 5 seconds. 2)Select the handset ID to be de-registered from the list. The phone will ask you to confirm the deregistration. Select Yes. To de-register expansion handsets DCX640 or DCX700, refer to their owner's manual or download from Uniden's website at www.uniden.com. - 4 -