Uniden DECT2188 English Owners Manual - Page 5
Test the Connection, Set Up the Accessory Handsets - 3 corded cordless phone
UPC - 050633272190
View all Uniden DECT2188 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Test the Connection Pick up the corded handset from the base. You should hear a dial tone and the display on the base should say Talk. When you get a dial tone, make a quick test call. If... Try... the display says Check Tel Line checking the connection between or you don't hear a dial tone the base and the phone jack. you keep hearing a dial tone changing to pulse dialing (see page 4). there's a lot of noise or static see page 27 for tips on avoiding interference. Set Up the Accessory Handset(s) If your phone came packaged with accessory handsets, follow the steps below to get your cordless handsets ready for use. Install the battery 1. Unpack all handsets, battery packs, and battery covers. If any handset has the battery cover already attached, press in on the notch and slide the cover down and off. 2. Line up the red and black wires on the battery pack with the label inside the handset. 3. Push the battery pack connector in until it clicks into place. Tug gently on the wires to make sure the battery pack Black Red is securely connected. 4. Place the cover over the battery compartment and slide it up into place.