Uniden DECT4096RE English Owners Manual - Page 4
Place the phone on the wall, Connect the power and telephone cords
 |
View all Uniden DECT4096RE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Connect the power and telephone cords 1. Connect the base AC adapter to the AC IN 7.8V jack and route the cord as shown: For desktop use For wall mount use WALL DESK DDEESSKK WALL DESK DESK WWAALLLL WALL 2. Connect the included two-line telephone cord to the Tel Line 1/2 jack. If your phone company uses a separate phone jack for each line, CteolenpnheoctnethDceoErSdK connect a standard here first. telephone cord to the Tel Line 2 jack. Route the cords as shown above. AC IN 7.8V TEL LINE 2 TEL LINE 1/2 IF you have a separate jack for line 2, connect WALL 3. Connect the cord from another phone cord here. Tel Line 1/2 to a two-line phone jack. OR If your phone company uses a separate phone jack for each line, connect the cord from Tel Line 1/2 to the jack for line 1; then, connect the cord from Tel Line 2 the jack for line 2. 4. Plug the AC adapter into a standard 120 V AC power outlet. Place the phone on the wall 1. On the front of the base, pull the clip that holds the corded handset in place out of its slot. 2. Rotate the clip 180 degrees. 3. Flip it from front to back and slide it back into the slot.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
 |
 |
