Uniden DXAI5588-3 English Owners Manual - Page 8
B. Install the Rechargeable Battery Packs into the Handsets, a click to insure connection. - batteries
UPC - 050633280133
View all Uniden DXAI5588-3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Use only the Uniden (BT-800) rechargeable battery pack supplied with your phone. B. Install the Rechargeable Battery Packs into the Handsets All handsets are powered by rechargeable battery packs. The battery recharges automatically when the handset is placed in the main base or charging cradle. 1) Press down on the handset battery case cover (use the finger indention for a better grip) and slide the cover downward to remove. 2) Plug the battery pack connector (red & black wires) into the small jack inside the battery compartment. (The connector notches fit into the grooves of the jack only one-way.) Match the wire colors to the polarity label in the battery compartment, connect the battery, and listen for a click to insure connection. 3) Make sure you have a good connection by slightly pulling on the battery wires. If the connection is secure, the battery jack will remain in place. 4) Place the battery case cover back in the handset by sliding it upwards until it clicks into place. [ 8 ] INSTALLING THE PHONE www.uniden.com