Uniden EXAI2248i English Owners Manual - Page 25

5) Press select. "Store Number" is displayed. The cursor flashes indicating that the display is ready for the number to be entered. 6) Use the number keys to enter the phone number. The phone number cannot exceed 20 digits. • Use redial/p to enter a pause in the dialing sequence. The display shows a "P". Each pause counts as one digit and represents a two second delay of time between the digits as they are sent. • Use delete/ch to delete digits as needed. 7)Press select. You will hear a confirmation tone and the following display appears. Memory storage is complete. For example, if you store a name and number into memory location number 7, the display shows "Memory 7 Stored". After about 2 seconds, "Memory Store" is displayed. Repeat steps 2 - 7 to store more numbers. 8)Press end to return to standby mode. Store Number Store Number 8002971023 Memory 7 Stored Memory Store 7 UNIDEN CORP 8 (Memory 8) • The pause feature is useful for long distance calling, credit card dialing, or sequences that require a pause between digits. • The pause key counts as one digit. Pressing redial/p more than once increases the length of a pause between numbers. • The 10 memory locations are represented by the numbers 0-9 on the keys. If you store a number in one of the locations, then attempt to store a different number in the same location later, the new number will overwrite the previous one. M E M O R Y D I A L I N G [ 23 ] MEMORY DIALING