Uniden EXAI8580 English Owners Manual - Page 10
Using Your Answering system
UPC - 050633280416
View all Uniden EXAI8580 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
7) Using Your Answering system 7-1. Setting Up the Answering System Here are some general tips on using your answering system menu: • To open the answering system menu, press [menu/clock] on the base. • The voice prompt announces each menu item. Press [menu/clock] to go to the next item. If you are already at the last menu item, the base beeps and returns to standby. • When you hear the menu item you want, use [vol/select/ ] and [vol/select/ ] to scroll through the options for that menu item. To quickly scroll through the options when setting the time or security code, press and hold [vol/select/ ] or [vol/select/ ]. • Press [set] to select the current option. • If you wait longer than five seconds before pressing a key, the system returns to standby. When you're setting the time, you have two minutes before the system exits the menu. • Press [ ] to exit the menu and return to standby. • If you receive an incoming call or if you press the [TALK/flash], the system automatically exits the menu. The flow chart below shows the answering system menu items and the available options: Time Press use The system announces "Time" 1. Select the day (1 - 7 ); then press SET. 2. Select the hour (1 - 12 ); then press SET. 3. Select the minutes (00 - 59 ); then press SET. to: 4. Select am/pm (A or P ). Press to save the setting. Security code Press The system use announces "Security code" Set a security code (01 - 99 ) so you can access the answering system when you're away from home. to: The default security code is 80. Press to save the setting. Ring Press The system use announces Set the number of rings the system will wait before it answers. Select 2, 4 , or 6 rings; select toll saver ( ) time "Ring time" to have the system answer in 2 rings if you have any new to: message or 4 rings if you don't. Press to save the setting. Record time Press The system use announces "Record time" Set how much time callers have to leave messages. Select 1 or 4 minutes; select announce only (A ) to have to: the system answer but not let callers leave messages. Press to save the setting. Message Press alert The system announces "Message alert" use Have the system sound a tone when you have new messages. Select on ( ) or off ( ). The tone sounds to: every 15 seconds until you listen to all new messages. Press to save the setting. Press Language The system announces "Language" use Change the language of the voice prompts. Select English ( E ), French ( F ), or Spanish ( S ). to: This doesn't affect the handset display. Press to save the setting. Press The system beeps and returns to standby. 7-2. Setting Your Outgoing Message (Greeting) The answering system comes with two prerecorded outgoing messages, or greetings. The default greeting says: "Hello, no one is available to take your call. Please leave a message after the tone." If you change the answering system to announce only (so it won't record any messages), the greeting changes to: "Hello. No one is available to take your call. Please call again." Recording your own greeting When you record your own greeting, the answering system does not delete the two prerecorded greetings: it saves your greeting along with them. 1) With the phone in standby, press and hold [greeting]. The base beeps and announces"Record greeting." 2) Start recording your message. Your greeting must be at least two seconds but no more than thirty seconds. The message counter display counts down from thirty so you know how many seconds you have left. 3) When you are finished recording, press [greeting], [ ] or [set]. The base sounds a confirmation tone, plays your greeting back for you. Selecting a greeting You can switch between the prerecorded greeting and your personal greeting any time: 1) With the phone in standby, press [greeting] to hear the currently-selected greeting. 2) While the greeting is playing, press [greeting] again to switch to the other greeting. After the greeting finishes playing, the base sounds a confirmation tone. Deleting your personal greeting Press [greeting]. While the currently-selected greeting is playing, press [ ]. The base deletes the personal greeting and announces "Greeting has been deleted." Note: You cannot delete the prerecorded greetings. Pressing [ ] always deletes the personal greeting.