Uniden EXI4246 English Owners Manual - Page 11

INSTALLING THE PHONE ! •Use only the supplied AD-0001 AC adapter. Do not use any other AC adapter. •Do not place the power cord where it creates a trip hazard or where it could become chafed and create a fire or electrical hazard. C. Connect the Base Unit and Charge the Handset 1) Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet. Route the cord. 2) Place the handset in the base unit with the keypad facing forward. 3) Make sure the charge/in use LED illuminates. If the LED does not illuminate, check to see that the AC adapter is plugged in and the handset makes good contact with the base charging contacts. • Connect the AC adapter to a continuous power supply. • Place the base unit close to the AC outlet to avoid long extension cords. 4) Charge your handset at least 15-20 hours before plugging the phone line. 5) Once the handset battery pack is fully charged, connect the telephone line cord to the TEL LINE jack and a telephone outlet. If your telephone outlet isn't modular, contact your telephone company for assistance. Modular [10] INSTALLING THE PHONE www.uniden.com