Uniden EXS9500 English Owners Manual - Page 11

CHARGING THE BATTERY PACK w Initial battery charging Before plugging the phone line into your new phone for the first time, fully charge the rechargeable battery pack for 15-20 hours without interruption. 1) Place the handset on the base. 2) Make sure that status LED lights. If the LED doesn't light, check to see that the AC adapter is plugged in and that the handset makes good contact with the base charging contacts. ! Please visit your authorized Uniden dealer to obtain an extra battery pack or contact the Uniden parts department at (800)554-3988. Hours are from 8:00 a.m. to 5:00 p.m. Central Time, Monday through Friday. w Charging optional battery packs The base unit of your phone is equipped with a compartment for charging an extra battery pack for use in your handset. You can obtain an extra battery pack from your authorized Uniden dealer. 1) Position the battery pack so the inner side with contacts is facing up. 2) Slide the battery pack into the charging compartment until it clicks into place. The compartment has a latch that keeps the battery in place. 3) Fully charge the battery for 15-20 hours. When charging is complete, pull up on the latch to remove the battery pack. To install the charged battery into the handset, refer to "Installing the Handset Battery Pack," page 9. In the event of a power failure, your spare battery pack can be used as a back-up power supply for the base unit. 10