Uniden GMR5098-2CKVP User Guide - Page 2

Using The Weather Radio, Specifications, Frequencies, Ctcss & Dcs Codes, Rbrc Information, - manual

Page 2 highlights

To adjust the sound, press MENU/ . Advance through the menu until TONE appears, then press ENTER/ . The current setting flashes. To turn off the beep: Press CH to display oF, then press ENTER/ . To turn on the beep: Press CH to display on, then press ENTER/ . Key Lock Press and hold the ENTER/ until LOCK appears. To turn Keylock off, press and hold ENTER/ again. Note: • If Keylock is on, the radio can still receive transmissions. Use D CALL in Standard mode, VO or , PTT, BOOST, LIGHT/MON, and MENU/ to turn the radio on or off. • The radio retains the keylock status even when you cycle power. Using the Flashlight You can use this radio in an emergency. If you press LIGHT/MON, the radio turns on the highintensity LED flashlight on your radio. Depending on how you set it up, the LED functions as a flashlight, flashes "S O S" in international Morse Code, is always on, or is off. Note: Your radio operates normally when the SOS strobe is activated. 1. Press LIGHT/MON while this light is turned off, the Strobe Light emits the SOS signal. (Strobe SOS mode) 2. And then, press LIGHT/MON once more, it will turn on continuously. (Always On mode) 3. And then, press LIGHT/MON while Always On mode, the light will be turned off. Automatic Power Save Feature Your radio has a unique circuit designed to dramatically extend the life of the battery. If you do not transmit and do not receive an incoming call within 3 seconds, your radio switches to the Power Save mode. The radio is still able to receive transmissions in this mode. LCD Backlight The LCD Backlight automatically turns on when any key (except for PTT and BOOST) is pressed. The LCD remains lit for 10 seconds before turning off. USING THE WEATHER RADIO Your radio can receive weather broadcasts from the NOAA National Weather Service. When in Weather Radio Alert mode, the system functions as it does in Standard mode or Group mode but also monitors the selected weather channel for alerts when not communicating. While using the Weather Radio, you are not able to receive GMRS communications. 1. To turn on the Weather Radio Broadcast mode, press WX/ALERT. WX appears. 2. Press CH or to increase or decrease the number to the desired Weather Channel. 3. To exit the Weather Radio Broadcast mode, press WX/ALERT. WX disappears. When in the Weather Radio Broadcast mode, you can only set the Beep Tone from the Menu mode. Choosing an Emergency/Weather Channel There are 7 NOAA channel frequencies available and these frequencies are common between the US and Canada. You need to know what frequency is being transmitted in your location. 1. Press and hold WX/ALERT. appears. 2. When the unit receives a warning signal, it beeps for 5 seconds. and channel indicator flash. 3. To turn off Weather Alert, press and hold WX/ALERT. disappears. • When Weather Alert is activated, the highest priority is given to this function. It checks the weather alert signals every 7 seconds. When the unit finds a warning signal, it switches to the Warning Receive mode automatically. • Weather Alert is activated even if Beep Tone is off. NOAA Weather Radio Frequency List: Chan. 1 Freq. (MHz) 162.550 Chan. 5 Freq. (MHz) 162.450 Item 1-7 Specification Up to 18 (up to 50 with BOOST) 8-14 15-22 Battery Life (Hours) Up to 5 Up to 18 (up to 50 with BOOST) 8.5 Hours (typical) -- NiMH Batteries (5/5/90 duty cycle) FREQUENCIES Frequency Chart CH. Freq. 1 462.5625 2 462.5875 3 462.6125 4 462.6375 5 462.6625 6 462.6875 7 462.7125 8 467.5625 9 467.5875 10 467.6125 11 467.6375 Cross-Ref. CH. Freq. CrossRef. FRS & GMRS 1 12 467.6625 FRS 12 FRS & GMRS 2 13 467.6875 FRS 13 FRS & GMRS 3 14 467.7125 FRS 14 FRS & GMRS 4 15 462.5500 GMRS 11 FRS & GMRS 5 16 462.5750 GMRS 8 FRS & GMRS 6 17 462.6000 GMRS 12 FRS & GMRS 7 18 462.6250 GMRS 9 FRS 8 19 462.6500 GMRS 13 FRS 9 20 462.6750 GMRS 10 FRS 10 21 462.7000 GMRS 14 FRS 11 22 462.7250 GMRS15 2 162.400 3 162.475 4 162.425 6 162.500 7 162.525 CTCSS & DCS CODES CTCSS Chart (Hz) SPECIFICATIONS Code Freq. Code Freq. oF OFF 13 103.5 Code Freq. 26 162.2 1 67.0 14 107.2 27 167.9 Item Specification Channels 15 GMRS/7 FRS/7 Weather Privacy Codes 38 Sub-Codes 83 DCS Codes Operating Frequency (MHz) GMRS/FRS: 462.5500 - 467.7125 WX: 162.4000 - 162.5500 Power Source Per radio: 3 AA NiMH Batteries (700 mAh) Range (Chan.) Miles 2 71.9 15 110.9 28 173.8 3 74.4 16 114.8 29 179.9 4 77.0 17 118.8 30 186.2 5 79.7 18 123.0 31 192.8 6 82.5 19 127.3 32 203.5 7 85.48 20 131.8 33 210.7 8 88.5 21 136.5 34 218.1 9 91.5 22 141.3 35 225.7 10 94.8 23 146.2 36 233.6 11 97.4 24 151.4 37 241.8 12 100.0 25 156.7 38 250.3 DSC Code List Tone No. Octal Code Tone No. 39 023 67 40 025 68 41 026 69 42 031 70 43 032 71 44 043 72 45 047 73 46 051 74 47 054 75 48 065 76 49 071 77 50 072 78 51 073 79 52 074 80 53 114 81 54 115 82 55 116 83 56 125 84 57 131 85 58 132 86 59 134 87 60 143 88 61 152 89 62 155 90 63 156 91 64 162 92 65 165 93 66 172 94 Octal Code 174 205 223 226 243 244 245 251 261 263 265 271 306 311 315 331 343 346 351 364 365 371 411 412 413 423 431 432 Tone No. 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 Octal Code 445 464 465 466 503 506 516 532 546 565 606 612 624 627 631 632 654 662 664 703 712 723 731 732 734 743 754 RBRC Information As part of our commitment to protect the environment and conserve natural resources, Uniden voluntarily participates in an RBRC® industry program to collect and recycle used Ni-MH batteries within the US. Please call 1-800-8-BATTERY for information on Ni-MH battery recycling in your area. (RBRC® is a registered trademark of the Rechargeable Battery Recycling Corporation.) MAINTENANCE To be safe and sure: • Never open your radio's case. • Never change or replace anything in your radio except the batteries. Care and Safety To clean the radio, use a soft cloth dampened with water. Do not use cleaners or solvents because they can harm the body of the unit and leak inside, causing permanent damage. Use a dry, lint-free cloth to clean the battery contacts. Do not submerge the unit in water. If the unit gets wet, turn it off and remove the batteries immediately. Dry the battery compartment with a soft cloth to minimize potential water damage. Leave the battery compartment cover off overnight to ensure complete drying. Do not use the radio until the unit is completely dry. Your radio might cause TV or radio interference even when it is operating properly. To determine whether your radio is causing the interference, turn it off. If the interference goes away, your radio is causing it. Try to eliminate the interference by moving your radio away from the receiver. If you cannot eliminate the interference, the FCC requires that you stop using the radio. Hazardous Environments Do not operate the radio in hazardous environments. Explosion or fire may result. Do not operate the radio near unshielded electrical blasting caps. Under certain conditions, radios can interfere with blasting operations and may cause an explosion. Turn your radio OFF to prevent accidental transmission when in a blasting area or in areas posted: "Turn off two-way radio." Construction crews often use remote control RF devices to set off explosives. WARNING! Read this information before using the radio. In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of the radio complies with the FCC guidelines and these international standards. Never allow children to operate the radio without adult supervision and the knowledge of the following guidelines. WARNING! It is up to the user to properly operate this radio transmitter to insure safe operation. Please adhere to the following: Do not use the radio with a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn may result. Please contact your local dealer for a replacement antenna. REGULATORY INFORMATION Hand-Held Operation (Held-to-Face) This device was evaluated for typical handheld (held-to-face) operations with a 1 inch spacing from the front of the radio. For handheld operation, the radio should be held 1 inch from the user's face in order to comply with FCC RF exposure requirements. Body-Worn Operation This device was evaluated for body-worn operations with the supplied belt-clip accessory. (All necessary accessories are included in the package; any additional or optional accessories are not required for compliance with the guidelines.) Third party accessories (unless approved by the manufacturer) should be avoided as these might not comply with FCC RF exposure guidelines. For body worn operation, this device has been tested and meets the Industry Canada RF exposure guidelines when used with Uniden accessories supplied or designated for this product. Use of other accessories may not ensure compliance with Industry Canada RF exposure guidelines. Fonctionnement de l'appareil, lorsque porté sur le corps. Cet appareil a été testé et s'est avéré conforme aux normes d'Industrie Canada et approuvé pour le port sur le corps à l'aide des accessoires Uniden inclus et conçus pour cet appareil. L'utilisation d'accessoires ne respectant pas les exigences d'exposition RF d'Industrie Canada doit être évitée. FCC Compliance This device complies with Part 15 of the FCC rules. Operation is subjected to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Avis de conformité à la FCC : Ce dispositif a été testé et s'avère conforme à l'article 15 des règlements de la Commission fédérale des communications (FCC). Ce dispositif est soumis aux conditions suivantes: 1) Ce dispositif ne doit pas causer d'interférences nuisibles et; 2) Il doit pouvoir supporter les parasites qu'il reçoit, incluant les parasites pouvant nuire à son fonctionnement. Tout changement ou modification non approuvé expressément par la partie responsable pourrait annuler le droit à l'utilisateur de faire fonctionner cet équipement. IC Compliance This device complies with Industry Canada license-exempt RSS standard(s).Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Cet appareil est conforme aux normes RSS exemptes de licences d'Industrie Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interférences nuisibles et (2), il doit pouvoir accepter les interférences, incluant celles pouvant nuire à son fonctionnement normal. Tout changement ou modification non approuvé expressément par la partie responsable pourrait annuler le droit à l'utilisateur de faire fonctionner cet équipement. ONE YEAR LIMITED WARRANTY Important: Save your receipt! Evidence of original purchase is required for warranty service. WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden") ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below. WARRANTY DURATION: This warranty to the original user shall terminate and be of no further effect 12 months after the date of original retail sale. The warranty is invalid if the Product is: (A) damaged or not maintained as reasonable or necessary, (B) modified, altered, or used as part of any conversion kits, sub-assemblies, or any configurations not sold by Uniden, (C) improperly installed, (D) serviced or repaired by someone other than an authorized Uniden service center for a defect or malfunction covered by this warranty, (E) used in any conjunction with equipment or parts or as part of any system not manufactured by Uniden, or (F) installed or programmed by anyone other than as detailed by the owner's manual for this product. STATEMENT OF REMEDY: In the event that the product does not conform to this warranty at any time while this warranty is in effect, warrantor will either, at its option, repair or replace the defective unit and return it to you without charge for parts, service, or any other cost (except shipping and handling) incurred by warrantor or its representatives in connection with the performance of this warranty. Warrantor, at its option, may replace the unit with a new or refurbished unit. THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OVERPAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow this exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. LEGAL REMEDIES: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This warranty . is void outside the United States of America and Canada. PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following the instructions in the owner's manual you are certain that the Product is defective, pack the Product carefully (preferably in its original packaging). Disconnect the battery from the Product and separately secure the battery in its own separate packaging within the shipping carton. The Product should include all parts and accessories originally packaged with the Product. Include evidence of original purchase and a note describing the defect that has caused you to return it.The Product should be shipped freight prepaid, by traceable means, to warrantor at: Uniden America Service C/O Saddle Creek 743 Henrietta Creek Road, Suite 100 Roanoke, TX 76262 © 2015 Uniden America Corp. All rights reserved Issue 2, March 2016 Printed in China

  • 1
  • 2

To adjust the sound, press
MENU/
. Advance
through the menu until
TONE
appears, then press
ENTER/
. The current setting flashes.
To turn off the beep:
Press
CH
to display
oF
, then press
ENTER/
.
To turn on the beep:
Press
CH
to display
on
, then press
ENTER/
.
Key Lock
Press and hold the
ENTER/
until
LOCK
appears.
To turn Keylock off, press and hold
ENTER/
again.
Note:
If Keylock is on, the radio can still receive
transmissions. Use
D CALL
in Standard mode,
VO
or
,
PTT
,
BOOST,
LIGHT/MON
, and
MENU/
to turn the radio on or off.
The radio retains the keylock status even when
you cycle power.
Using the Flashlight
You can use this radio in an emergency. If you
press
LIGHT/MON
, the radio turns on the high-
intensity LED flashlight on your radio. Depending
on how you set it up, the LED functions as a
flashlight, flashes “S O S” in international Morse
Code, is always on, or is off.
Note:
Your radio operates normally when the
SOS strobe is activated.
1. Press
LIGHT/MON
while this light is turned off,
the Strobe Light emits the SOS signal. (Strobe
SOS mode)
2. And then, press
LIGHT/MON
once more, it will
turn on continuously. (Always On mode)
3. And then, press
LIGHT/MON
while Always On
mode, the light will be turned off.
Automatic Power Save Feature
Your radio has a unique circuit designed to
dramatically extend the life of the battery. If you do
not transmit and do not receive an incoming call
within 3 seconds, your radio switches to the Power
Save mode. The radio is still able to receive
transmissions in this mode.
LCD Backlight
The LCD Backlight automatically turns on when any
key (except for
PTT
and
BOOST
) is pressed. The
LCD remains lit for 10 seconds before turning off.
USING THE WEATHER RADIO
Your radio can receive weather broadcasts from the
NOAA National Weather Service. When in Weather
Radio Alert mode, the system functions as it does
in Standard mode or Group mode but also monitors
the selected weather channel for alerts when not
communicating. While using the Weather Radio,
you are not able to receive GMRS communications.
1. To turn on the Weather Radio Broadcast mode,
press
WX/ALERT
.
WX
appears.
2. Press
CH
or
to increase or decrease the
number to the desired Weather Channel.
3. To exit the Weather Radio Broadcast mode, press
WX/ALERT
.
WX
disappears.
When in the Weather Radio Broadcast mode, you
can only set the Beep Tone from the Menu mode.
Choosing an Emergency/Weather Channel
There are 7 NOAA channel frequencies available
and these frequencies are common between the US
and Canada. You need to know what frequency is
being transmitted in your location.
1. Press and hold
WX/ALERT
.
appears.
2. When the unit receives a warning signal, it beeps
for 5 seconds.
and channel indicator flash.
3. To turn off Weather Alert, press and hold
WX/ALERT
.
disappears.
When Weather Alert is activated, the highest
priority is given to this function. It checks the
weather alert signals every 7 seconds. When the
unit finds a warning signal, it switches to the
Warning Receive mode automatically.
Weather Alert is activated even if Beep Tone is
off.
NOAA Weather Radio Frequency List:
Chan.
Freq.
(MHz)
Chan.
Freq.
(MHz)
1
162.550
5
162.450
2
162.400
6
162.500
3
162.475
7
162.525
4
162.425
SPECIFICATIONS
Item
Specification
Channels
15 GMRS/7 FRS/7 Weather
Privacy
Codes
38 Sub-Codes
83 DCS Codes
Operating Frequency (MHz)
GMRS/FRS:
462.5500 - 467.7125
WX:
162.4000 - 162.5500
Power
Source
Per radio: 3 AA NiMH Batteries
(700 mAh)
Range
(Chan.)
Miles
Item
Specification
1-7
Up to 18 (up to 50 with
BOOST
)
8-14
Up to 5
15-22
Up to 18 (up to 50 with
BOOST
)
Battery Life
(Hours)
8.5 Hours (typical) -- NiMH
Batteries (5/5/90 duty cycle)
FREQUENCIES
Frequency Chart
CH.
Freq.
Cross-Ref.
CH.
Freq.
Cross-
Ref.
1
462.5625
FRS & GMRS 1
12
467.6625
FRS 12
2
462.5875
FRS & GMRS 2
13
467.6875
FRS 13
3
462.6125
FRS & GMRS 3
14
467.7125
FRS 14
4
462.6375
FRS & GMRS 4
15
462.5500
GMRS 11
5
462.6625
FRS & GMRS 5
16
462.5750
GMRS 8
6
462.6875
FRS & GMRS 6
17
462.6000
GMRS 12
7
462.7125
FRS & GMRS 7
18
462.6250
GMRS 9
8
467.5625
FRS 8
19
462.6500
GMRS 13
9
467.5875
FRS 9
20
462.6750
GMRS 10
10
467.6125
FRS 10
21
462.7000
GMRS 14
11
467.6375
FRS 11
22
462.7250
GMRS15
CTCSS & DCS CODES
CTCSS Chart (Hz)
Code
Freq.
Code
Freq.
Code
Freq.
oF
OFF
13
103.5
26
162.2
1
67.0
14
107.2
27
167.9
2
71.9
15
110.9
28
173.8
3
74.4
16
114.8
29
179.9
4
77.0
17
118.8
30
186.2
5
79.7
18
123.0
31
192.8
6
82.5
19
127.3
32
203.5
7
85.48
20
131.8
33
210.7
8
88.5
21
136.5
34
218.1
9
91.5
22
141.3
35
225.7
10
94.8
23
146.2
36
233.6
11
97.4
24
151.4
37
241.8
12
100.0
25
156.7
38
250.3
DSC Code List
Tone
No.
Octal
Code
Tone
No.
Octal
Code
Tone
No.
Octal
Code
39
023
67
174
95
445
40
025
68
205
96
464
41
026
69
223
97
465
42
031
70
226
98
466
43
032
71
243
99
503
44
043
72
244
100
506
45
047
73
245
101
516
46
051
74
251
102
532
47
054
75
261
103
546
48
065
76
263
104
565
49
071
77
265
105
606
50
072
78
271
106
612
51
073
79
306
107
624
52
074
80
311
108
627
53
114
81
315
109
631
54
115
82
331
110
632
55
116
83
343
111
654
56
125
84
346
112
662
57
131
85
351
113
664
58
132
86
364
114
703
59
134
87
365
115
712
60
143
88
371
116
723
61
152
89
411
117
731
62
155
90
412
118
732
63
156
91
413
119
734
64
162
92
423
120
743
65
165
93
431
121
754
66
172
94
432
RBRC Information
As part of our commitment to
protect the environment and
conserve natural resources,
Uniden voluntarily participates
in an RBRC
®
industry program
to collect and recycle used Ni-MH batteries
within the US.
Please call 1-800-8-BATTERY for information on
Ni-MH battery recycling in your area. (RBRC
®
is
a registered trademark of the Rechargeable
Battery Recycling Corporation.)
MAINTENANCE
To be safe and sure:
Never open your radio’s case.
Never change or replace anything in your radio
except the batteries.
Care and Safety
To clean the radio, use a soft cloth
dampened with water. Do not use cleaners or
solvents because they can harm the body of
the unit and leak inside, causing permanent
damage. Use a dry, lint-free cloth to clean
the battery contacts. Do not submerge the
unit in water. If the unit gets wet, turn it off
and remove the batteries immediately.
Dry the battery compartment with a soft cloth
to minimize potential water damage. Leave
the battery compartment cover off overnight
to ensure complete drying. Do not use the
radio until the unit is completely dry.
Your radio might cause TV or radio
interference even when it is operating
properly. To determine whether your radio is
causing the interference, turn it off. If the
interference goes away, your radio is causing
it. Try to eliminate the interference by moving
your radio away from the receiver. If you
cannot eliminate the interference, the FCC
requires that you stop using the radio.
Hazardous Environments
Do not operate the radio in hazardous
environments. Explosion or fire may result.
Do not operate the radio near unshielded
electrical blasting caps.
Under certain conditions, radios can interfere
with blasting operations and may cause an
explosion. Turn your radio OFF to prevent
accidental transmission when in a blasting
area or in areas posted: "Turn off two-way
radio." Construction crews often use remote
control RF devices to set off explosives.
WARNING!
Read this information before
using the radio. In August 1996 the Federal
Communications Commission (FCC) of the
United States with its action in Report and
Order FCC 96-326 adopted an updated
safety standard for human exposure to radio
frequency electromagnetic energy emitted by
FCC regulated transmitters.
Those guidelines are consistent with the
safety standard previously set by both U.S.
and international standards bodies. The
design of the radio complies with the FCC
guidelines and these international standards.
Never allow children to operate the radio
without adult supervision and the knowledge
of the following guidelines.
WARNING!
It is up to the user to properly
operate this radio transmitter to insure safe
operation. Please adhere to the following:
Do not use the radio with a damaged
antenna. If a damaged antenna comes into
contact with the skin, a minor burn may result.
Please contact your local dealer for a
replacement antenna.
REGULATORY INFORMATION
Hand-Held Operation (Held-to-Face)
This device was evaluated for typical hand-
held (held-to-face) operations with a 1 inch
spacing from the front of the radio. For hand-
held operation, the radio should be held 1
inch from the user's face in order to comply
with FCC RF exposure requirements.
Body-Worn Operation
This device was evaluated for body-worn
operations with the supplied belt-clip
accessory. (All necessary accessories are
included in the package; any additional or
optional accessories are not required for
compliance with the guidelines.) Third party
accessories (unless approved by the
manufacturer) should be avoided as these
might not comply with FCC RF exposure
guidelines.
For body worn operation, this device has
been tested and meets the Industry Canada
RF exposure guidelines when used with
Uniden accessories supplied or designated for
this product. Use of other accessories may
not ensure compliance with Industry Canada
RF exposure guidelines.
Fonctionnement de l’appareil, lorsque porté
sur le corps. Cet appareil a été testé et s’est
avéré conforme aux normes d’Industrie
Canada et approuvé pour le port sur le corps
à l’aide des accessoires Uniden inclus et
conçus pour cet appareil. L’utilisation
d'accessoires ne respectant pas les
exigences d'exposition RF d’Industrie Canada
doit être évitée.
FCC Compliance
This device complies with Part 15 of the FCC
rules. Operation is subjected to the following
two conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
Changes or modifications not expressly
WARRANTY DURATION: This warranty to the
original user shall terminate and be of no further
effect 12 months after the date of original retail sale.
The warranty is invalid if the Product is:
(A) damaged or not maintained as reasonable or
necessary, (B) modified, altered, or used as part of
any conversion kits, sub-assemblies, or any
configurations not sold by Uniden, (C) improperly
installed, (D) serviced or repaired by someone other
than an authorized Uniden service center for a defect
or malfunction covered by this warranty, (E) used in
any conjunction with equipment or parts or as part of
any system not manufactured by Uniden, or (F)
installed or programmed by anyone other than as
detailed by the owner’s manual for this product.
STATEMENT OF REMEDY: In the event that the
product does not conform to this warranty at any time
while this warranty is in effect, warrantor will either, at
its option, repair or replace the defective unit and
return it to you without charge for parts, service, or
any other cost (except shipping and handling)
incurred by warrantor or its representatives in
connection with the performance of this warranty.
Warrantor, at its option, may replace the unit with a
new or refurbished unit.
THE LIMITED WARRANTY SET FORTH ABOVE IS
THE SOLE AND ENTIRE WARRANTY PERTAINING
TO THE PRODUCT AND IS IN LIEU OF AND
EXCLUDES ALL OTHER WARRANTIES OF ANY
NATURE WHATSOEVER, WHETHER EXPRESS,
IMPLIED OR ARISING BY OPERATION OF LAW,
INCLUDING, BUT NOT LIMITED TO ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE.THIS
WARRANTY DOES NOT COVER OR PROVIDE
FOR THE REIMBURSEMENT OVERPAYMENT OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Some states do not allow this exclusion or limitation
of incidental or consequential damages so the above
limitation or exclusion may not apply to you.
LEGAL REMEDIES: This warranty gives you specific
legal rights, and you may also have other rights
which vary from state to state. This warranty
.
is void
outside the United States of America and Canada.
PROCEDURE FOR OBTAINING PERFORMANCE
OF WARRANTY: If, after following the instructions in
the owner’s manual you are certain that the Product
is defective, pack the Product carefully (preferably in
its original packaging). Disconnect the battery from
the Product and separately secure the battery in its
own separate packaging within the shipping carton.
The Product should include all parts and accessories
originally packaged with the Product. Include
evidence of original purchase and a note describing
the defect that has caused you to return it.The
Product should be shipped freight prepaid, by
traceable means, to warrantor at:
Uniden America Service
C/O Saddle Creek
743 Henrietta Creek Road, Suite 100
Roanoke, TX 76262
approved by the party responsible for
compliance could void your authority to
operate the equipment.
Avis de conformité à la FCC : Ce dispositif a
été testé et s’avère conforme à l’article 15
des règlements de la Commission fédérale
des communications (FCC). Ce dispositif est
soumis aux conditions suivantes: 1) Ce
dispositif ne doit pas causer d’interférences
nuisibles et; 2) Il doit pouvoir supporter les
parasites qu’il reçoit, incluant les parasites
pouvant nuire à son fonctionnement.
Tout changement ou modification non
approuvé expressément par la partie
responsable pourrait annuler le droit à
l’utilisateur de faire fonctionner cet
équipement.
IC Compliance
This device complies with Industry Canada
license-exempt RSS standard(s).Operation is
subject to the following two conditions: (1)
this device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause
undesired operation of the device.
Changes or modifications not expressly
approved by the party responsible for
compliance could void your authority to
operate the equipment.
Cet appareil est conforme aux normes RSS
exemptes de licences d’Industrie Canada.
Son fonctionnement est soumis aux deux
conditions suivantes : (1) cet appareil ne doit
pas causer d’interférences nuisibles et (2), il
doit pouvoir accepter les interférences,
incluant celles pouvant nuire à son
fonctionnement normal.
Tout changement ou modification non
approuvé expressément par la partie
responsable pourrait annuler le droit à
l’utilisateur de faire fonctionner cet
équipement.
ONE YEAR LIMITED
WARRANTY
Important:
Save your receipt!
Evidence of
original purchase is required for warranty service.
WARRANTOR: UNIDEN AMERICA
CORPORATION ("Uniden")
ELEMENTS OF WARRANTY: Uniden warrants, for
one year, to the original retail owner, this Uniden
Product to be free from defects in materials and
craftsmanship with only the limitations or exclusions
set out below.
© 2015 Uniden America Corp.
Issue 2, March 2016
All rights reserved
Printed in China