Uniden LRD6399SWS English Owners Manual - Page 12

Operation, Power On, Volume Control

Get Uniden LRD6399SWS PDF manuals and user guides View all Uniden LRD6399SWS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

Operation You are now ready to enjoy the convenience and security of your LRD 6299SWS/LRD 6399SWS. Please read this section of the Operating Guide carefully to familiarize yourself with the basic operation of this unit. Power On Turn the Volume control to switch on the power. When you power up the LRD 6299SWS/LRD 6399SWS, it performs a self-test of all its circuits. This test takes about 5 seconds, during which you will hear the different alarm tones and see all the LEDs. First, you will hear the X-band alarm for 2 seconds while the X-band indicator, City, and Mute LEDs light. The test also checks the signal meter LEDs. It is best to adjust the audible alarm during the self-test. Next you'll hear the K-band/SWS alarm, Ka-SuperWideband alarm, and Laser alarm, each for 1 second, while the corresponding signal indicator LED lights. (The power LED remains on until you turn off the unit.) The LRD 6299SWS/LRD 6399SWS always turns on with its last setting. After the LRD 6299SWS/LRD 6399SWS confirms proper operation, the alert tones and all LEDs, except the green Power LED, turn off. If the Power LED does not light, check the cigarette lighter socket connection. If the unit turns on and off intermittently, or the alert tone sounds too often for no reason, check the power cord connection at both ends to be sure it is not loose. Volume Control Adjust the Volume control to a comfortable alarm tone level for your vehicle. The volume level does not have any effect on the unit's sensitivity. Increase Volume Off 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
Operation
You are now ready to enjoy the convenience and security of your LRD
6299SWS/LRD 6399SWS. Please read this section of the Operating
Guide carefully to familiarize yourself with the basic operation of this
unit.
Power On
Turn the Volume control to switch on the power. When you power up the
LRD 6299SWS/LRD 6399SWS, it performs a self-test of all its circuits.
This test takes about 5 seconds, during which you will hear the different
alarm tones and see all the LEDs. First, you will hear the X-band alarm
for 2 seconds while the X-band indicator, City, and Mute LEDs light. The
test also checks the signal meter LEDs. It is best to adjust the audible
alarm during the self-test. Next you’ll hear the K-band/SWS alarm,
Ka-SuperWideband alarm, and Laser alarm, each for 1 second, while the
corresponding signal indicator LED lights. (The power LED remains on
until you turn off the unit.) The LRD 6299SWS/LRD 6399SWS always
turns on with its last setting.
After the LRD 6299SWS/LRD 6399SWS confirms proper operation, the
alert tones and all LEDs, except the green Power LED, turn off. If the
Power LED does not light, check the cigarette lighter socket connection.
If the unit turns on and off intermittently, or the alert tone sounds too
often for no reason, check the power cord connection at both ends to be
sure it is not loose.
Volume Control
Adjust the Volume control
to a comfortable alarm tone
level for your vehicle. The
volume level does not have
any effect on the unit’s
sensitivity.
Off
Increase
Volume
12