Uniden PC78XL English Owners Manual - Page 6
Mobile Station Installation, Mobile Station Antenna, Marine Installation - radio
UPC - 050633550069
View all Uniden PC78XL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
pc78xl.qxd 2/25/99 10:09 AM Page 4 Installation MOBILE STATION INSTALLATION Plan the location of the transceiver and microphone bracket before beginning installation. 1. Select a location that is convenient for operating the radio, but does not interfere with the driver or passenger. 2. Install bracket with self-tapping screws provided. 3. Connect wiring. (See instructions for Connecting the Power Cords). 4. Attach the microphone bracket to side of the radio. 5. Attach radio to bracket. MOBILE STATION ANTENNA Because the maximum power output of the transmitter is limited by the FCC, the quality of your antenna is very important. To achieve the maximum transmission distance, we strongly recommend that you install only a high quality antenna. You have just purchased a superior transceiver - don't diminish its performance by installing an inferior antenna. Only a properly matched antenna system will allow maximum power transfer from the 50 ohm transmission line to the radiating element. Your Uniden dealer is qualified to help you select the proper antenna for your requirements. A whip style antenna may be used for automobile installation. A short 'loaded' whip antenna is easier to install on an automobile. However, the efficiency of the short whip antenna is less than that of a full quarter-wave whip antenna. MARINE INSTALLATION Consult your dealer for information regarding marine installation. It is important to adequately ground the system and to prevent electrolysis between the fittings in the hull and the water. 4