Uniden SC200SS English Owners Manual - Page 36
Ctcss
View all Uniden SC200SS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
CTCSS and DCS begins flashing in display. The scanner starts searching for an associated CTCSS tone or CDCSS tone when it stops on a transmission. All tones are checked if the transmission is long enough. However, if you press ,and there is break before a tone is identified, the tone search starts where it left off when the transmission begins again. 3. If a CTCSS tone is found, the tone begins flashing in the display. 4. Press to program the tone with the frequency stored in the channel. -- OR -- Send the frequency with its associated tone to another channel. For information about sending a frequency to another channel, see Programming Channels on the page 19. 5. Restart the search and repeat Steps 3 - 4 to search for tones associated with other frequencies in the search range you set in Step 1. 34