Uniden TRU446-2 English Owners Manual - Page 25

Selecting a Different Channel If you encounter interference while using your phone, you can manually change the phone's channel for clear operation. This function works only when the phone is in use. Press select/ch. "Scanning" appears on the display, indicating the phone is changing to another channel. For more information on interference, refer to "Radio Interference" on page 46. Find Handset To locate the handset, press find handset on the base. The handset beeps for 60 seconds, and "Paging" appears on the display. Paging is canceled when pressing any key on the handset or find handset on the base. Additionally, if you receive an incoming call, page is canceled. Flash and Call Waiting If you have Call Waiting service and a call waiting tone sounds while you are on a call, press talk/flash to accept the waiting call. There is a short pause, then you will hear the new caller. To return to the original caller, press talk/flash again. Voice Mail LED The voice mail LED on the handset is designed to work with your voice mail service provided by your local telephone company. The LED flashes when you have new incoming messages in the voice mail service. You may need to occasionally reset the indicator if it remains On after you've retrieved your messages. To reset the indicator, when the phone is in the standby mode press and hold find handset on the base until the paging sound stops (about 5 seconds). • If the handset battery is completely drained, the handset will not beep when paging. • You must subscribe through your local telephone company to receive Call Waiting Service. B A S I C S [ 23 ] BASICS